chore: add support for customize app_conf_default.h

Signed-off-by: Frederic Pillon <[email protected]>

src/utility/STM32Cube_FW/app_conf_default.h

@@ -48,7 +48,9 @@
 /**
  * Define Tx Power
  */
-#define CFG_TX_POWER (0x18) /* -0.15dBm */
+#ifndef CFG_TX_POWER
+ #define CFG_TX_POWER (0x18) /* -0.15dBm */
+#endif
 
 #if 0
 /**
@@ -132,13 +134,25 @@
  * Maximum number of simultaneous connections that the device will support.
  * Valid values are from 1 to 8
  */
-#define CFG_BLE_NUM_LINK 8
+#ifndef CFG_BLE_NUM_LINK
+#ifdef STM32WB15xx
+ #define CFG_BLE_NUM_LINK 3
+#else
+ #define CFG_BLE_NUM_LINK 8
+#endif
+#endif
 
 /**
  * Maximum number of Services that can be stored in the GATT database.
  * Note that the GAP and GATT services are automatically added so this parameter should be 2 plus the number of user services
  */
-#define CFG_BLE_NUM_GATT_SERVICES 8
+#ifndef CFG_BLE_NUM_GATT_SERVICES
+#ifdef STM32WB15xx
+ #define CFG_BLE_NUM_GATT_SERVICES 4
+#else
+ #define CFG_BLE_NUM_GATT_SERVICES 8
+#endif
+#endif
 
 /**
  * Maximum number of Attributes
@@ -147,13 +161,21 @@
  * Note that certain characteristics and relative descriptors are added automatically during device initialization
  * so this parameters should be 9 plus the number of user Attributes
  */
-#define CFG_BLE_NUM_GATT_ATTRIBUTES 68
+#ifndef CFG_BLE_NUM_GATT_ATTRIBUTES
+#ifdef STM32WB15xx
+ #define CFG_BLE_NUM_GATT_ATTRIBUTES 30
+#else
+ #define CFG_BLE_NUM_GATT_ATTRIBUTES 68
+#endif
+#endif
 
 /**
  * Maximum supported ATT_MTU size
  * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
  */
-#define CFG_BLE_MAX_ATT_MTU (156)
+#ifndef CFG_BLE_MAX_ATT_MTU
+ #define CFG_BLE_MAX_ATT_MTU (156)
+#endif
 
 /**
  * Size of the storage area for Attribute values
@@ -166,14 +188,22 @@
  * The total amount of memory needed is the sum of the above quantities for each attribute.
  * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
  */
-#define CFG_BLE_ATT_VALUE_ARRAY_SIZE (1344)
+#ifndef CFG_BLE_ATT_VALUE_ARRAY_SIZE
+#ifdef STM32WB15xx
+ #define CFG_BLE_ATT_VALUE_ARRAY_SIZE (1290)
+#else
+ #define CFG_BLE_ATT_VALUE_ARRAY_SIZE (1344)
+#endif
+#endif
 
 /**
  * Prepare Write List size in terms of number of packet
  * This parameter is ignored by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY flag set
  */
 // #define CFG_BLE_PREPARE_WRITE_LIST_SIZE BLE_PREP_WRITE_X_ATT(CFG_BLE_MAX_ATT_MTU)
-#define CFG_BLE_PREPARE_WRITE_LIST_SIZE (0x3A)
+#ifndef CFG_BLE_PREPARE_WRITE_LIST_SIZE
+ #define CFG_BLE_PREPARE_WRITE_LIST_SIZE (0x3A)
+#endif
 
 /**
  * Number of allocated memory blocks
@@ -185,12 +215,16 @@
 /**
  * Enable or disable the Extended Packet length feature. Valid values are 0 or 1.
  */
-#define CFG_BLE_DATA_LENGTH_EXTENSION 1
+#ifndef CFG_BLE_DATA_LENGTH_EXTENSION
+ #define CFG_BLE_DATA_LENGTH_EXTENSION 1
+#endif
 
 /**
  * Sleep clock accuracy in Slave mode (ppm value)
  */
-#define CFG_BLE_SLAVE_SCA 500
+#ifndef CFG_BLE_SLAVE_SCA
+ #define CFG_BLE_SLAVE_SCA 500
+#endif
 
 /**
  * Sleep clock accuracy in Master mode
@@ -203,7 +237,9 @@
  * 6 : 21 ppm to 30 ppm
  * 7 : 0 ppm to 20 ppm
  */
-#define CFG_BLE_MASTER_SCA 0
+#ifndef CFG_BLE_MASTER_SCA
+ #define CFG_BLE_MASTER_SCA 0
+#endif
 
 /**
  * LsSource
@@ -212,21 +248,27 @@
  * - bit 1: 1: STM32WB5M Module device 0: Other devices as STM32WBxx SOC, STM32WB1M module
  * - bit 2: 1: HSE/1024 Clock config 0: LSE Clock config
  */
-#if defined(STM32WB5Mxx)
- #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
-#else
- #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+#ifndef CFG_BLE_LS_SOURCE
+ #if defined(STM32WB5Mxx)
+ #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+ #else
+ #define CFG_BLE_LS_SOURCE (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+ #endif
 #endif
 
 /**
  * Start up time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 us (~2.44 us)
  */
-#define CFG_BLE_HSE_STARTUP_TIME 0x148
+#ifndef CFG_BLE_HSE_STARTUP_TIME
+ #define CFG_BLE_HSE_STARTUP_TIME 0x148
+#endif
 
 /**
  * Maximum duration of the connection event when the device is in Slave mode in units of 625/256 us (~2.44 us)
  */
-#define CFG_BLE_MAX_CONN_EVENT_LENGTH (0xFFFFFFFF)
+#ifndef CFG_BLE_MAX_CONN_EVENT_LENGTH
+ #define CFG_BLE_MAX_CONN_EVENT_LENGTH (0xFFFFFFFF)
+#endif
 
 /**
  * Viterbi Mode
@@ -314,7 +356,11 @@
  * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
  */
 
-#define CFG_BLE_MAX_ADV_SET_NBR (8)
+#if defined(STM32WB15xx)
+ #define CFG_BLE_MAX_ADV_SET_NBR (3)
+#else
+ #define CFG_BLE_MAX_ADV_SET_NBR (8)
+#endif
 
  /* Maximum advertising data length (in bytes)
  * Range: 31 .. 1650 with limitation:
@@ -323,7 +369,11 @@
  * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
  */
 
-#define CFG_BLE_MAX_ADV_DATA_LEN (207)
+#if defined(STM32WB15xx)
+ #define CFG_BLE_MAX_ADV_DATA_LEN (414)
+#else
+ #define CFG_BLE_MAX_ADV_DATA_LEN (207)
+#endif
 
  /* RF TX Path Compensation Value (16-bit signed integer). Units: 0.1 dB.
  * Range: -1280 .. 1280