CCNET CashCode bill validator

Implementation of the CCNET protocol for CashCode bill validator written in C++

Requirements

Uses boost libraries (curr version=1.67)
Linux OS (software use port name = "/ttyS..")

Overview

Software gives to C/C++ developer an interface for working with bill validator

• Software can automatically try to find port with bill validator (on different ports, with different baud rate)
• Connect to bill validator (open port and make connection with args)
• disconnect (disable validator and close port)
• Listen port for any action (and any errors too)
• Hold bill (send this command in cycle to hold bill in validator)
• Stack bill (require one command for stacking)
• Unstack bill (if validator hold bill, to unstack it send this command)
• Thread locking ('set_mutex(...)', if mutex==nullptr => program will skip locking

IMPORTANT! You should to use 'bill_interface_new' class It gives you ability to make connection, reconnect validator and disable it Also, this class have 'get_instance(...)' and 'destroy_instance(...)' methods They are easy to use!

Supports

Protocols:

1. CCNET

Baud rates:

1. 19200
2. 9600

Serial ports:

1. /dev/ttyS{0..31} (exmpl: /dev/ttyS0)