KAMP PRINT_START macro sets low bed temperature before probing for mesh #660
Closed
WayneManion
started this conversation in
Issues
Replies: 1 comment
-
I figured out the problem. I was wrapping the KAMP START_PRINT macro with another macro and I was not passing the bed temperature parameter through properly. The KAMP START_PRINT macro then used the default bed temp value of 50 C during meshing. |
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
I print some ABS and ASA in my K1. I have KAMP installed using the script.
I like to preheat the printer when I print these materials in order to reduce warping. I preheat the printer by setting the bed temperature to 100C for ten minutes or so before I send my print job to the printer.
I preheated the printer today. I noticed that the script (presumably the START_PRINT macro in the KAMP folder) set the bed temperature to 50C before it probed for the bed mesh. That does not seem like the right thing to do. I thought about editing the START_PRINT macro in the Start_Print.cfg file in the KAMP folder. The file appeared to be set to read-only so I thought I should ask about it here before running wild.
Any thoughts on this?
Beta Was this translation helpful? Give feedback.
All reactions