DIGImend kernel drivers

This is a collection of graphics tablet drivers for the Linux kernel, produced and maintained by the DIGImend project. We maintain this package to provide newer drivers for older kernel versions which don't have them, and to allow users to test new drivers before we contribute them to the mainline kernel.

This package supersedes the huion-driver package.

Model support is as follows:

Original                    Rebranded as            Status*             Upstream in

   Huion 540                                        works               3.17
         580                                        likely works        3.11
         H420               osu!tablet              works               3.17
         H610                                       works               3.17
         H610 Pro                                   works               3.17
         H690                                       works               3.17
         K58                                        works               3.11
         W58                                        likely works        3.11
         W58L                                       works               3.11
         other                                      possibly works      3.17

 Yiynova MSP19U                                     works
         MSP19U+                                    works
         MVP22U+                                    works
         MVP10U                                     works (t)
         MVP10U IPS                                 works (t)
         MVP10U HD IPS                              works (t)
         DP10U                                      works (t)
         DP10U+                                     works (t)

     KYE MousePen i608X v2  Genius MousePen i608X   works

* "works"           - tested, works
  "likely works"    - not tested, likely works (75% chance)
  "possibly works"  - not tested, possibly works (50% chance)

(t) concerns only the input part of this display tablet, output (display)
    support is not provided by this package and should be verified
    separately

Please send your testing results to [email protected], or do a pull request with updates.

Installing

Kernel v3.5 or newer is required. Kernel headers or the build tree for the running kernel are required.

On Debian-derived systems (such as Ubuntu and Mint) headers can be obtained by installing appropriate version of linux-headers package. On Red Hat and derived distributions the package name is kernel-headers.

To build the drivers run make in the package's directory.

Please disregard the possible "Can't read private key" messages. They don't affect the driver functionality, unless you set up kernel module signature verification.

To install the drivers run make install as root in the package's directory.

See the DIGImend project support page for further setup instructions.

Upgrading

If you run a kernel which already has a driver for your tablet with the same name as the one being installed (including the case of upgrading an installation of this package), you will need to unload the installed kernel's driver using the rmmod command and then to (re-)plug the tablet in to allow the driver from this package to take over.

For example, if you run a v3.11 or later kernel, and/or would like to upgrade the driver for Huion tablets, then after installing this package you will need to execute rmmod hid-huion, and then disconnect and reconnect the tablet to make it work.

Alternatively, you can simply reboot the machine.

Uninstalling

To uninstall the package execute make uninstall as root in the package source directory.