Replies: 10 comments 2 replies
-
btw. I paired this HS2WD-E device with another Z2M instance which has several paired devices and the dashboard works and shows all devices except this one, so it's not a general dashboard problem but a problem with HS2WD-E not showing up in the dashboard. Any ideas? |
Beta Was this translation helpful? Give feedback.
-
I think there are no exposes on this device that will trigger the creation of a dashboard card. |
Beta Was this translation helpful? Give feedback.
-
I found another device which is not showing in Z2M's dashboard, although it is listed as device and exposes stuff. Any ideas why and is there anything to do about this? |
Beta Was this translation helpful? Give feedback.
-
The Aqara wireless remote switch H1 [WXKG15LM] has the same problem. The device exposes several properties but doesn't show up in the dashboard tab. Other supported Aqara devices are there. |
Beta Was this translation helpful? Give feedback.
-
Hi, I have the same problem. I recently bought several Heiman HS1SA smoke sensors. I enrolled them in Z2M but they appear as HS3SA, a newer model I guess. They all appear as devices but only 2 appear in the Z2M Dashboard. I noticed that they appeared after a restart at the Host. Strangely, the other sensors completely disappeared from the Z2M and I had to re-enroll them but also still not showing in Z2M Dashboard. Any Ideas? |
Beta Was this translation helpful? Give feedback.
-
I found this discussion via Google Search. I can't quite figure out what triggers dashboard card or not. For example, I have a few contact sensors that only expose contact status and I cannot set anything manually -- they are on the dashboard. However, the Button, which also are "read only" -- do not show in the dashboard. It is inconsistent enough that I can't pinpoint what is the trigger. Seems like a bug?? |
Beta Was this translation helpful? Give feedback.
-
Looks like I'm in the same situation: my "Innr SP 240" does show up in the Dashboard but my "Robb smarrt" switch does not. I'd love to learn about this. Does it have to do with the order in which it was added? In my case the "Robb smarrt" switch was not supported yet and I actually made a PR to add it. (Which got accepted quickly.) Maybe I will re-pair the switch to see if it then gets added to the Dashboard. |
Beta Was this translation helpful? Give feedback.
-
OK, even after re-pairing it does not show up. Can we manually add stuff to the Dashboard? Maybe through some MQTT-message? Oh, wait, the UI/Dashboard is a different repo/project, isn't it? |
Beta Was this translation helpful? Give feedback.
-
Utterly sad that nobody could answer this question...... |
Beta Was this translation helpful? Give feedback.
-
Same here with IKEA E2001/E2002. |
Beta Was this translation helpful? Give feedback.
-
I'm busy setting up HA on a Raspberry Pi for a holiday home so having it up and running, I added 1 device to Z2M and I can see it, albeit with a few problems. It is this device: https://www.zigbee2mqtt.io/devices/HS2WD-E.html#heiman-hs2wd-e
Any advice?
It seems to have a problem or two:
Logs:
AND the "dashboard" is blank, Google Chrome isn't showing any errors so I dunno.
Open for any suggestions to debug this mess :-/
Beta Was this translation helpful? Give feedback.
All reactions