Quick Start

Quick start

This document describes how to get a tiqr demo running on your system using the SimpleSAMLphp tiqr module. It is written for linux and osx. Other systems will probably need some modifications.

It is assumed you have a working php setup. Note that tiqr requires some php packages for interfacing to curl and gd, for example. On an Ubuntu 16.04 (Xenial Xerus) system, php can be installed with:

$ sudo apt install php php-zip php-sqlite3 php-dom php-curl php-gmp php-gd

Mac osx users can use HomeBrew to install for a particular version of php (php 5.6 for instance):

 $ brew install php56 php56-gmp

Step 1: install SimpleSAMLphp

Download and unpack the latest SimpleSAMLphp release from github. For example:

$ wget https:/simplesamlphp/simplesamlphp/releases/download/v1.14.11/simplesamlphp-1.14.11.tar.gz
$ tar xzf simplesamlphp-1.14.11.tar.gz
$ cd simplesamlphp-1.14.11/

We will be running SimpleSAMLphp using PHP's built-in Web Server. The default configuration assumes the use of a virtual directory named simplesaml, so we simulate one using a symbolic link:

$ ln -s . www/simplesaml

Now you can check if SimpleSAMLphp is installed by starting your Web Server:

$ php -S 0:8080 -t www

Open the URL http://localhost:8080 using a web browser.

Step 2: install the SimpleSAMLphp tiqr module

Installing the tiqr module is easiest using composer, a dependency management tool for PHP. (Download)[https://getcomposer.org/download/] and install composer according to the instructions on the composer web site, or if you don't care about security, run:

$ curl -sS https://getcomposer.org/installer | php

Then install the tiqr module using:

$ ./composer.phar require tiqr/simplesamlphp-module-authtiqr

Activate the default tiqr configuration using

$ cp modules/authTiqr/config-templates/module_tiqr.php config/

Add a tiqr authentication source by editing the file config/authsources.php and include the line

'authTiqr' => array('authTiqr:Tiqr'),

Step 3: test

Start your web server using

$ php -S 0:8080 -t www

Note that we specify 0 as our IP address. This is important because the web server needs to listen on all interfaces so that your mobile phone's tiqr app can communicate with your web server. For this to work, also make sure nothing is blocking communication between your phone and your web server. Use a tool like ifconfig to find out what IP address to use, for instance:

$ ifconfig en0 | grep inet
	inet 192.0.2.1 netmask 0xffffff00 broadcast 192.0.2.255

So if your IP address is 192.0.2.1, point your browser to http://192.0.2.1:8080

Then, use the tiqr app on your Android phone to enrol a new account. Note that using an iOS device requires the use of https for enrolment due to Apple's App Transport Security.