No Girino detected on COM8

[mezarkabul]

Hello, i upload to maple mini and download girinoscope frond end program but when i try to start, program given No girino detected on COM8 error. I try on serial port when i sent "s" character return data. I think maple mini program working. But i didnt understand why girinoscope doesn't work.

I use
Windows 10
Girinoscope 1.3.3 and Girino_stm32f103mm_v2_compat

[ag88]

as i've not really tested this in windows, note that this project is based on stm32duino libmaple core
https:/rogerclarkmelbourne/Arduino_STM32

there are some hints on the installation here
https:/rogerclarkmelbourne/Arduino_STM32/wiki/Installation
if you install the drivers correctly and that the sketch/firmware is installed on an stm32f103c8 (e.g. maple mini or blue pill board) appropriately you should be able to connect to it on a serial terminal app like putty
https://www.putty.org/

the forum for stm32duino is here
https://www.stm32duino.com/
do review the faqs for stm32duino here
https://www.stm32duino.com/viewtopic.php?f=2&t=3
https://www.stm32duino.com/viewtopic.php?f=2&t=301

note that that forum do not discuss anything about this girino implementation, but just provide information about the stm32duino arduino cores.