-
Notifications
You must be signed in to change notification settings - Fork 144
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Error connecting to Basler A2a2600-20gcPRO REV: 12 through default.yaml #226
Comments
Hello @tui-abdul |
Describe what you want to implement and what the issue & the steps to reproduce it are:
I want to specify user id via config_file, which in this case is default.yaml, I have tried to configure it using following ros2 command "startup_user_set:=Default" but i face the following error.
pylon_ros2_camera_wrapper-1] 1718269086.782112861 [basler.pylon.ros2.pylon_ros2_gige_ace2_camera] [ERROR] Error applying camera specific startup setting for GigE cameras: Parameter not found in CFloatParameter::GetMax. (No node attached.)
[pylon_ros2_camera_wrapper-1] 1718269086.782186581 [basler.pylon.ros2.pylon_ros2_camera_node] [ERROR] Error while applying the user-specified startup settings (e.g., mtu size for GigE, ...) to the camera!
[pylon_ros2_camera_wrapper-1] 1718269086.782263233 [basler.pylon.ros2.pylon_ros2_camera_node] [ERROR] Error when trying to init and register. Shutting down now.
This problem is already reported [https://issues/66#issue-787006921]
Hardware setup description
Ubuntu 22.04 Jammy, x86_64,
Runtime information
Is your camera operational with the Basler pylon Viewer on your platform?
Yes
The text was updated successfully, but these errors were encountered: