HAVEN

HAVEN (High Availability Vault for Events on Nostr) is the most sovereign personal relay for the Nostr protocol, for storing and backing up sensitive notes like eCash, private chats and drafts. It is a relay that is not so dumb, with features like web of trust, inbox relay, cloud backups, blastr and the ability to import old notes.

Four Relays in One

Private Relay: This relay is only accessible by the owner of the relay. It is used for drafts, ecash and other private notes that nobody can read or write to. It is protected by Auth.

Chat Relay: This relay is used to contact the owner by DM. Only people in the web of trust can interact with this relay, protected by Auth. It only accepts encrypted DMs and group chat kinds.

Inbox Relay: This relay is where the owner of the relay reads from. Send your zaps, reactions and replies to this relay when you're tagging the owner. You can also pull notes from this relay if you want notes where the owner is tagged. This relay automatically pulls notes from other relays. Only notes where the owner is tagged will be accepted to this relay.

Outbox Relay: This relay is where the owner's notes all live and are publicly accessible. You can import all your old notes to this relay. All notes sent to this relay are blasted to other relays. Only the owner can send to this relay, but anyone can read.

Not So Dumb Relay Features

Web of Trust: Protected from DM and Inbox spam by using a web of trust.

Inbox Relay: Notes are pulled from other relays and stored in the inbox relay.

Cloud Backups: Notes are backed up in the cloud and can be restored if the relay is lost.

Blastr: Notes sent to the outbox are also blasted to other relays.

Import Old Notes: Import your old notes and notes you're tagged in from other relays.

Prerequisites

• Go: Ensure you have Go installed on your system. You can download it from here.
• Build Essentials: If you're using Linux, you may need to install build essentials. You can do this by running sudo apt install build-essential.

Setup Instructions

Follow these steps to get the Haven Relay running on your local machine:

1. Clone the repository

git clone https:/bitvora/haven.git
cd haven

2. Copy .env.example to .env

You'll need to create an .env file based on the example provided in the repository.

cp .env.example .env

3. Set your environment variables

Open the .env file and set the necessary environment variables.

4. Create the relays JSON files

Copy the example relays JSON files for your seed and blastr relays:

cp relays_import.example.json relays_import.json

cp relays_blastr.example.json relays_blastr.json

The JSON should contain an array of relay URLs, which default to wss:// if you don't explicitly specify the protocol.

4. Build the project

Run the following command to build the relay:

go build

5. Create a Systemd Service

To have the relay run as a service, create a systemd unit file. Make sure to limit the memory usage to less than your system's total memory to prevent the relay from crashing the system.

1. Create the file:

sudo nano /etc/systemd/system/haven.service

2. Add the following contents:

[Unit]
Description=Haven Relay
After=network.target

[Service]
ExecStart=/home/ubuntu/haven/haven
WorkingDirectory=/home/ubuntu/haven
Restart=always

[Install]
WantedBy=multi-user.target

Replace /path/to/ with the actual paths where you cloned the repository and stored the .env file.

3. Reload systemd to recognize the new service:

sudo systemctl daemon-reload

4. Start the service:

sudo systemctl start haven

5. (Optional) Enable the service to start on boot:

sudo systemctl enable haven

6. Serving over nginx (optional)

You can serve the relay over nginx by adding the following configuration to your nginx configuration file:

server {
    listen 80;
    server_name yourdomain.com;

    location / {
        proxy_pass http://localhost:3355;
        proxy_set_header Host $host;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header X-Forwarded-Proto $scheme;
        proxy_http_version 1.1;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection "upgrade";
    }
}

Replace yourdomain.com with your actual domain name.

After adding the configuration, restart nginx:

sudo systemctl restart nginx

7. Install Certbot (optional)

If you want to serve the relay over HTTPS, you can use Certbot to generate an SSL certificate.

sudo apt-get update
sudo apt-get install certbot python3-certbot-nginx

After installing Certbot, run the following command to generate an SSL certificate:

sudo certbot --nginx

Follow the instructions to generate the certificate.

8. Run The Import (optional)

If you want to import your old notes and notes you're tagged in from other relays, run the following command:

./haven --import

9. Access the relay

Once everything is set up, the relay will be running on localhost:3355 with the following endpoints:

• localhost:3355 (outbox)
• localhost:3355/private
• localhost:3355/chat
• localhost:3355/inbox

Cloud Backups

The relay automatically backs up your database to a cloud provider of your choice.

AWS

To back up your database to AWS, you'll need to first install and configure the awscli. You can do this by running the following commands:

sudo python3 -m pip install awscli
aws configure

After configuring the awscli, you can set the following environment variables in your .env file:

AWS_ACCESS_KEY_ID=your_access_key_id
AWS_SECRET_ACCESS_KEY=your_secret_access_key
AWS_REGION=your_region
AWS_BUCKET=your_bucket

Replace your_access_key_id, your_secret_access_key, your_region, and your_bucket with your actual AWS credentials.

License

This project is licensed under the MIT License.