HDMI on WH works on warm reboot/wake but fails on cold boot. #20
Comments
chewitt
pushed a commit
that referenced
this issue
Apr 1, 2023
[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Oct 19, 2023
commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 torvalds#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 torvalds#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 torvalds#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 torvalds#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Oct 19, 2023
[ Upstream commit c777b11 ] Inject fault while probing mdpy.ko, if kstrdup() of create_dir() fails in kobject_add_internal() in kobject_init_and_add() in mdev_type_add() in parent_create_sysfs_files(), it will return 0 and probe successfully. And when rmmod mdpy.ko, the mdpy_dev_exit() will call mdev_unregister_parent(), the mdev_type_remove() may traverse uninitialized parent->types[i] in parent_remove_sysfs_files(), and it will cause below null-ptr-deref. If mdev_type_add() fails, return the error code and kset_unregister() to fix the issue. general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 2 PID: 10215 Comm: rmmod Tainted: G W N 6.6.0-rc2+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? __kobject_del+0x62/0x1c0 kobject_del+0x32/0x50 parent_remove_sysfs_files+0xd6/0x170 [mdev] mdev_unregister_parent+0xfb/0x190 [mdev] ? mdev_register_parent+0x270/0x270 [mdev] ? find_module_all+0x9d/0xe0 mdpy_dev_exit+0x17/0x63 [mdpy] __do_sys_delete_module.constprop.0+0x2fa/0x4b0 ? module_flags+0x300/0x300 ? __fput+0x4e7/0xa00 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fbc813221b7 Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe780e0648 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00007ffe780e06a8 RCX: 00007fbc813221b7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055e214df9b58 RBP: 000055e214df9af0 R08: 00007ffe780df5c1 R09: 0000000000000000 R10: 00007fbc8139ecc0 R11: 0000000000000206 R12: 00007ffe780e0870 R13: 00007ffe780e0ed0 R14: 000055e214df9260 R15: 000055e214df9af0 </TASK> Modules linked in: mdpy(-) mdev vfio_iommu_type1 vfio [last unloaded: mdpy] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:__kobject_del+0x62/0x1c0 Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 51 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 28 48 8d 7d 10 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 24 01 00 00 48 8b 75 10 48 89 df 48 8d 6b 3c e8 RSP: 0018:ffff88810695fd30 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffffffffa0270268 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000004 RDI: 0000000000000010 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed10233a4ef1 R10: ffff888119d2778b R11: 0000000063666572 R12: 0000000000000000 R13: fffffbfff404e2d4 R14: dffffc0000000000 R15: ffffffffa0271660 FS: 00007fbc81981540(0000) GS:ffff888119d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc14a142dc0 CR3: 0000000110a62003 CR4: 0000000000770ee0 DR0: ffffffff8fb0bce8 DR1: ffffffff8fb0bce9 DR2: ffffffff8fb0bcea DR3: ffffffff8fb0bceb DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: da44c34 ("vfio/mdev: simplify mdev_type handling") Signed-off-by: Jinjie Ruan <[email protected]> Reviewed-by: Eric Farman <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Oct 19, 2023
[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Dec 19, 2023
When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Jan 8, 2024
When running autonuma with enabling multi-size THP, I encountered the following kernel crash issue: [ 134.290216] list_del corruption. prev->next should be fffff9ad42e1c490, but was dead000000000100. (prev=fffff9ad42399890) [ 134.290877] kernel BUG at lib/list_debug.c:62! [ 134.291052] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 134.291210] CPU: 56 PID: 8037 Comm: numa01 Kdump: loaded Tainted: G E 6.7.0-rc4+ #20 [ 134.291649] RIP: 0010:__list_del_entry_valid_or_report+0x97/0xb0 ...... [ 134.294252] Call Trace: [ 134.294362] <TASK> [ 134.294440] ? die+0x33/0x90 [ 134.294561] ? do_trap+0xe0/0x110 ...... [ 134.295681] ? __list_del_entry_valid_or_report+0x97/0xb0 [ 134.295842] folio_undo_large_rmappable+0x99/0x100 [ 134.296003] destroy_large_folio+0x68/0x70 [ 134.296172] migrate_folio_move+0x12e/0x260 [ 134.296264] ? __pfx_remove_migration_pte+0x10/0x10 [ 134.296389] migrate_pages_batch+0x495/0x6b0 [ 134.296523] migrate_pages+0x1d0/0x500 [ 134.296646] ? __pfx_alloc_misplaced_dst_folio+0x10/0x10 [ 134.296799] migrate_misplaced_folio+0x12d/0x2b0 [ 134.296953] do_numa_page+0x1f4/0x570 [ 134.297121] __handle_mm_fault+0x2b0/0x6c0 [ 134.297254] handle_mm_fault+0x107/0x270 [ 134.300897] do_user_addr_fault+0x167/0x680 [ 134.304561] exc_page_fault+0x65/0x140 [ 134.307919] asm_exc_page_fault+0x22/0x30 The reason for the crash is that, the commit 85ce2c5 ("memcontrol: only transfer the memcg data for migration") removed the charging and uncharging operations of the migration folios and cleared the memcg data of the old folio. During the subsequent release process of the old large folio in destroy_large_folio(), if the large folio needs to be removed from the split queue, an incorrect split queue can be obtained (which is pgdat->deferred_split_queue) because the old folio's memcg is NULL now. This can lead to list operations being performed under the wrong split queue lock protection, resulting in a list crash as above. After the migration, the old folio is going to be freed, so we can remove it from the split queue in mem_cgroup_migrate() a bit earlier before clearing the memcg data to avoid getting incorrect split queue. [[email protected]: fix comment, per Zi Yan] Link: https://lkml.kernel.org/r/61273e5e9b490682388377c20f52d19de4a80460.1703054559.git.baolin.wang@linux.alibaba.com Fixes: 85ce2c5 ("memcontrol: only transfer the memcg data for migration") Signed-off-by: Baolin Wang <[email protected]> Reviewed-by: Nhat Pham <[email protected]> Reviewed-by: Yang Shi <[email protected]> Reviewed-by: Zi Yan <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Muchun Song <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Shakeel Butt <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Mar 22, 2024
Commit a5a9230 (fbdev: fbcon: Properly revert changes when vc_resize() failed) started restoring old font data upon failure (of vc_resize()). But it performs so only for user fonts. It means that the "system"/internal fonts are not restored at all. So in result, the very first call to fbcon_do_set_font() performs no restore at all upon failing vc_resize(). This can be reproduced by Syzkaller to crash the system on the next invocation of font_get(). It's rather hard to hit the allocation failure in vc_resize() on the first font_set(), but not impossible. Esp. if fault injection is used to aid the execution/failure. It was demonstrated by Sirius: BUG: unable to handle page fault for address: fffffffffffffff8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286 Call Trace: <TASK> con_font_get drivers/tty/vt/vt.c:4558 [inline] con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673 vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline] vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752 tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803 vfs_ioctl fs/ioctl.c:51 [inline] ... So restore the font data in any case, not only for user fonts. Note the later 'if' is now protected by 'old_userfont' and not 'old_data' as the latter is always set now. (And it is supposed to be non-NULL. Otherwise we would see the bug above again.) Signed-off-by: Jiri Slaby (SUSE) <[email protected]> Fixes: a5a9230 ("fbdev: fbcon: Properly revert changes when vc_resize() failed") Reported-and-tested-by: Ubisectech Sirius <[email protected]> Cc: Ubisectech Sirius <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Helge Deller <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
chewitt
pushed a commit
that referenced
this issue
May 26, 2024
commit a5b862c upstream. l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Jun 16, 2024
[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 #1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) #2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) #3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 #4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 #5 0x55c94045c776 in ui_browser__show ui/browser.c:288 #6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 #7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 #8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 #9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 #10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 #11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 #12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 #13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 #14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 #15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 #16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 #17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 #18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 #19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 #20 0x55c9400e53ad in main tools/perf/perf.c:561 #21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 #23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Jun 16, 2024
[ Upstream commit a5b862c ] l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fixes: 6ed58ec ("Bluetooth: Use LE buffers for LE traffic") Suggested-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Jul 1, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
chewitt
pushed a commit
that referenced
this issue
Jul 1, 2024
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from qdisc->dev_queue->dev <NULL> ->name This situation simulated from bunch of veths and Bluetooth disconnection and reconnection. During qdisc initialization, qdisc was being set to noop_queue. In veth_init_queue, the initial tx_num was reduced back to one, causing the qdisc reset to be called with noop, which led to the kernel panic. I've attached the GitHub gist link that C converted syz-execprogram source code and 3 log of reproduced vmcore-dmesg. https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740 Yeoreum and I use two fuzzing tool simultaneously. One process with syz-executor : https:/google/syzkaller $ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \ -enable=none -collide=false log1 The other process with perf fuzzer: https:/deater/perf_event_tests/tree/master/fuzzer $ perf_event_tests/fuzzer/perf_fuzzer I think this will happen on the kernel version. Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10. This occurred from 51270d5. I think this patch is absolutely necessary. Previously, It was showing not intended string value of name. I've reproduced 3 time from my fedora 40 Debug Kernel with any other module or patched. version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug [ 5287.164555] veth0_vlan: left promiscuous mode [ 5287.164929] veth1_macvtap: left promiscuous mode [ 5287.164950] veth0_macvtap: left promiscuous mode [ 5287.164983] veth1_vlan: left promiscuous mode [ 5287.165008] veth0_vlan: left promiscuous mode [ 5287.165450] veth1_macvtap: left promiscuous mode [ 5287.165472] veth0_macvtap: left promiscuous mode [ 5287.165502] veth1_vlan: left promiscuous mode … [ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state [ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state [ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state [ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state [ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state [ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state [ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0 [ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state … [ 5298.002798] bridge_slave_0: left promiscuous mode [ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state [ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface [ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface [ 5298.320207] bond0 (unregistering): Released all slaves [ 5298.354296] hsr_slave_0: left promiscuous mode [ 5298.360750] hsr_slave_1: left promiscuous mode [ 5298.374889] veth1_macvtap: left promiscuous mode [ 5298.374931] veth0_macvtap: left promiscuous mode [ 5298.374988] veth1_vlan: left promiscuous mode [ 5298.375024] veth0_vlan: left promiscuous mode [ 5299.109741] team0 (unregistering): Port device team_slave_1 removed [ 5299.185870] team0 (unregistering): Port device team_slave_0 removed … [ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1 [ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9 [ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9 …. [ 5301.075531] team0: Port device team_slave_1 added [ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state [ 5301.085588] bridge_slave_0: entered allmulticast mode [ 5301.085800] bridge_slave_0: entered promiscuous mode [ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state [ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state … [ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.193481] hsr_slave_0: entered promiscuous mode [ 5301.204425] hsr_slave_1: entered promiscuous mode [ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.210185] Cannot create hsr debugfs directory [ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link [ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link [ 5301.255934] team0: Port device team_slave_0 added [ 5301.256480] team0: Port device team_slave_1 added [ 5301.256948] team0: Port device team_slave_0 added … [ 5301.435928] hsr_slave_0: entered promiscuous mode [ 5301.446029] hsr_slave_1: entered promiscuous mode [ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.455884] Cannot create hsr debugfs directory [ 5301.502664] hsr_slave_0: entered promiscuous mode [ 5301.513675] hsr_slave_1: entered promiscuous mode [ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.526164] Cannot create hsr debugfs directory [ 5301.563662] hsr_slave_0: entered promiscuous mode [ 5301.576129] hsr_slave_1: entered promiscuous mode [ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present! [ 5301.580270] Cannot create hsr debugfs directory [ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0 [ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137] [ 5301.595877] Mem abort info: [ 5301.595881] ESR = 0x0000000096000006 [ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits [ 5301.595889] SET = 0, FnV = 0 [ 5301.595893] EA = 0, S1PTW = 0 [ 5301.595896] FSC = 0x06: level 2 translation fault [ 5301.595900] Data abort info: [ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000 [ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 5301.595915] [dfff800000000026] address between user and kernel address ranges [ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP … [ 5301.596076] CPU: 2 PID: 102769 Comm: syz-executor.3 Kdump: loaded Tainted: G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1 [ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023 [ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 5301.596085] pc : strnlen+0x40/0x88 [ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596124] sp : ffff8000beef6b40 [ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001 [ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00 [ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140 [ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8 [ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006 [ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5 [ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec [ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200 [ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1 [ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130 [ 5301.596166] Call trace: [ 5301.596175] strnlen+0x40/0x88 [ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0 [ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538 [ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0 [ 5301.596188] qdisc_reset+0x43c/0x5e8 [ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770 [ 5301.596194] veth_init_queues+0xfc/0x130 [veth] [ 5301.596198] veth_newlink+0x45c/0x850 [veth] [ 5301.596202] rtnl_newlink_create+0x2c8/0x798 [ 5301.596205] __rtnl_newlink+0x92c/0xb60 [ 5301.596208] rtnl_newlink+0xd8/0x130 [ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890 [ 5301.596214] netlink_rcv_skb+0x1c4/0x380 [ 5301.596225] rtnetlink_rcv+0x20/0x38 [ 5301.596227] netlink_unicast+0x3c8/0x640 [ 5301.596231] netlink_sendmsg+0x658/0xa60 [ 5301.596234] __sock_sendmsg+0xd0/0x180 [ 5301.596243] __sys_sendto+0x1c0/0x280 [ 5301.596246] __arm64_sys_sendto+0xc8/0x150 [ 5301.596249] invoke_syscall+0xdc/0x268 [ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240 [ 5301.596259] do_el0_svc+0x48/0x68 [ 5301.596261] el0_svc+0x50/0x188 [ 5301.596265] el0t_64_sync_handler+0x120/0x130 [ 5301.596268] el0t_64_sync+0x194/0x198 [ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842) [ 5301.596285] SMP: stopping secondary CPUs [ 5301.597053] Starting crashdump kernel... [ 5301.597057] Bye! After applying our patch, I didn't find any kernel panic errors. We've found a simple reproducer # echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable # ip link add veth0 type veth peer name veth1 Error: Unknown device type. However, without our patch applied, I tested upstream 6.10.0-rc3 kernel using the qdisc_reset event and the ip command on my qemu virtual machine. This 2 commands makes always kernel panic. Linux version: 6.10.0-rc3 [ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty (paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024 Kernel panic message: [ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 615.237250] Dumping ftrace buffer: [ 615.237679] (ftrace buffer empty) [ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6 Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6 8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0 1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08 615.252376] Hardware name: linux,dummy-virt (DT) [ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 615.254433] pc : strnlen+0x6c/0xe0 [ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.256088] sp : ffff800080b269a0 [ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27: 0000000000000001 [ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24: ffffc070f619cf60 [ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21: dfff800000000000 [ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18: ffffc070f448b800 [ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15: ffffc070f4ba2a90 [ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12: 1ffff00010164d72 [ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 : ffffc070e85d6184 [ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 : 000000001504a6d3 [ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 : 0000000000000000 [ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 : 0000000000000000 [ 615.268747] Call trace: [ 615.269180] strnlen+0x6c/0xe0 [ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0 [ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8 [ 615.271667] __traceiter_qdisc_reset+0xa0/0x140 [ 615.272499] qdisc_reset+0x554/0x848 [ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8 [ 615.274050] veth_init_queues+0x110/0x220 [veth] [ 615.275110] veth_newlink+0x538/0xa50 [veth] [ 615.276172] __rtnl_newlink+0x11e4/0x1bc8 [ 615.276944] rtnl_newlink+0xac/0x120 [ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370 [ 615.278409] netlink_rcv_skb+0x25c/0x4f0 [ 615.279122] rtnetlink_rcv+0x48/0x70 [ 615.279769] netlink_unicast+0x5a8/0x7b8 [ 615.280462] netlink_sendmsg+0xa70/0x1190 Yeoreum and I don't know if the patch we wrote will fix the underlying cause, but we think that priority is to prevent kernel panic happening. So, we're sending this patch. Fixes: 51270d5 ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string") Link: https://lore.kernel.org/lkml/[email protected]/t/ Cc: [email protected] Tested-by: Yunseong Kim <[email protected]> Signed-off-by: Yunseong Kim <[email protected]> Signed-off-by: Yeoreum Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
On devices with vendor u-boot, the HDMI output only works after a reboot or suspend/wake event, not from cold boot (as seen using UART to track the OS). I'm not sure if this is still an issue with upstream u-boot?
The text was updated successfully, but these errors were encountered: