Suddenly no access http, rtsp, telnet

[jjintn]

Just tried to access my yi home cam after being unplugged for several months. It boots up and lights go from yellow to flashing blue to solid blue indicating it is connected to wi-fi (also logs show it is updating time through ntp server), but can't access the camera at all. Trying to ping ip gives host unreachable error. I've tried holding pin to reset without sd card, and hear the Chinese voice on boot. re-insert sd card and led is solid blue but still no response when trying to connect. IP is set as static through router (ASUS rt-AC3100 running Merlin 380.69 firmware). Any help would be appreciated!

`Starting to log...
Hardware version informations :
hwplatform=2
Software version informations :
[sys]
version=1.8.5.1M_201512011815
[kernel]
version=3-0.8
provider=18e
devtype=18e
Firmware letter is : 'M'
The RTSP server binary version which will be used is the 'M'
The HTTP server binary version which will be used is the 'M'
Check for some files size...
-rwxr-xr-x 1 root root 144885 Oct 4 2016 /home/hd1/test/http/serverJ
-rwxr-xr-x 1 root root 144912 Oct 4 2016 /home/hd1/test/http/serverM
-rwxr-xr-x 1 root root 121932 Oct 4 2016 /home/hd1/test/rtspsvrI
-rwxr-xr-x 1 root root 39572 Oct 4 2016 /home/hd1/test/rtspsvrK
-rwxr-xr-x 1 root root 39580 Oct 4 2016 /home/hd1/test/rtspsvrM
The blue led is currently blinking
Debug mode = no
Check for wifi configuration file...*
/home/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Wifi configuration answer:
Do network configuration 1/2 (ip and gateway)
Done
Configuration is :
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

ra0       Link encap:Ethernet  HWaddr B0:D5:9D:99:5E:0A  
          inet addr:192.168.1.62  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::b2d5:9dff:fe99:5e0a/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:55 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:14917 (14.5 KiB)  TX bytes:300 (300.0 B)

Do network configuration 2/2 (DNS)
Done
Get time from a NTP server...
But first, test the NTP server '0.us.pool.ntp.org':
PING 0.us.pool.ntp.org (68.171.16.3): 56 data bytes
64 bytes from 68.171.16.3: seq=0 ttl=45 time=67.313 ms

--- 0.us.pool.ntp.org ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 67.313/67.313/67.313 ms
Previous datetime is Sun Jan 28 15:30:40 EST 2018
Done
New datetime is Sun Jan 28 15:30:40 EST 2018
Start blue led on
Start ftp server...
Check for ftp process :
1233 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
Start http server : serverM...
Check for http server process :
1260 root 1408 S ./serverM 80
Start rtsp server : rtspsvrM...
Check for rtsp process :
1364 root 2660 S < ./rtspsvrM
Processes after startup :
PID USER VSZ STAT COMMAND
1 root 1708 S init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW [kworker/u:0]
6 root 0 SW [rcu_kthread]
7 root 0 SW< [khelper]
8 root 0 SW [kworker/u:1]
143 root 0 SW [sync_supers]
145 root 0 SW [bdi-default]
146 root 0 SW< [kintegrityd]
148 root 0 SW< [kblockd]
161 root 0 SW [khubd]
174 root 0 SW< [cfg80211]
175 root 0 SW [kworker/0:1]
257 root 0 SW< [rpciod]
260 root 0 SW [kswapd0]
314 root 0 SW [fsnotify_mark]
322 root 0 SW< [nfsiod]
331 root 0 SW< [crypto]
405 root 0 SW [mtdblock0]
410 root 0 SW [mtdblock1]
415 root 0 SW [mtdblock2]
420 root 0 SW [mtdblock3]
425 root 0 SW [mtdblock4]
430 root 0 SW [mtdblock5]
435 root 0 SW [mtdblock6]
438 root 0 SW [romblock0]
441 root 0 SW [romblock1]
444 root 0 SW [romblock2]
447 root 0 SW [romblock3]
450 root 0 SW [romblock4]
453 root 0 SW [romblock5]
456 root 0 SW [romblock6]
591 root 0 SW< [kpsmoused]
600 root 0 SW [kworker/u:2]
616 root 0 SW [mmcqd/0]
620 root 0 SWN [jffs2_gcd_mtd4]
624 root 1712 S /bin/sh /etc/init.d/rcS
636 root 872 S < udevd --daemon
642 root 1704 S /bin/sh /etc/init.d/S80network
656 root 0 SWN [jffs2_gcd_mtd5]
657 root 1708 S /bin/sh ./init.sh
664 root 0 SW [flush-mtd-unmap]
675 root 1712 S /bin/sh /home/hd1/test/equip_test.sh
677 root 0 SW [flush-179:0]
680 root 1704 S telnetd
686 root 984 S /home/log_server
816 root 0 SW [RtmpTimerTask]
817 root 0 SW [RtmpMlmeTask]
818 root 0 SW [RtmpCmdQTask]
819 root 0 SW [RtmpWscTask]
949 root 0 SW [hidog]
987 root 1164 S ./peripheral
988 root 1144 S < ./dispatch
989 root 1068 S ./exnet
1122 root 3128 S /home/wpa_supplicant -B -i ra0 -c /home/wpa_supplica
1233 root 1716 S tcpsvd -vE 0.0.0.0 21 ftpd -w /
1260 root 1408 S ./serverM 80
1278 root 3396 S ./record_event
1279 root 22984 S ./mp4record 60
1308 root 1716 S /usr/sbin/crond -b
1321 root 904 S /home/led_ctl -boff -bon
1359 root 94492 S ./rmm
1364 root 27252 S N ./rtspsvrM
1471 root 1708 R ps
Storage status :
Filesystem Size Used Available Use% Mounted on
/dev/root 3.5M 2.7M 828.0K 77% /
tmpfs 17.2M 16.0K 17.2M 0% /dev
/dev/mtdblock5 8.9M 8.3M 560.0K 94% /home
tmpfs 32.0M 44.0K 32.0M 0% /tmp
/dev/hd1 7.4G 73.9M 7.3G 1% /tmp/hd1
tmpfs 512.0K 16.0K 496.0K 3% /home/mmap_tmpfs
tmpfs 16.0M 4.0K 16.0M 0% /home/tmpfs
tmpfs 16.0M 3.0M 13.0M 19% /home/jrview
/dev/hd1 7.4G 73.9M 7.3G 1% /tmp/hd1/test/http/record
`

[Clem-]

Hi @jjintn,
What is the ip address you are trying to reach?