qubic - node

Qubic Node Source Code - this repository contains the source code of a full qubic node.

Prerequisites

To run a qubic node, you need the following parts:

• Bare Metal Server/Computer with at least 8 Cores (high CPU frequency with AVX2 support)
• At least 128GB memory
• 1Gb/s synchronous internet connection
• An USB Stick or SSD/HD attached to the Computer
• An UEFI Bios

you will need the current spectrum, universe and computer files to be able to start qubic. the latest files can be found in our discord channel: https://discord.gg/qubic

Prepare your USB Stick/SSD/HD

1. Your Qubic Boot device should be formatted as FAT32 and have the label QUBIC.

# sample command in linux
mkfs.fat -F 32 -n QUBIC /dev/sda

2. We recommend to have this structure on the disk.

/computer.XXX
/spectrum.XXX
/system
/universe.XXX
/efi/boot
/efi/boot/Bootx64.efi
/efi/boot/statrup.nsh
/efi/boot/Qubic.efi

• computer.XXX => must be the current computer file. XXX must be replaced with current epoch. (e.g computer.068)
• universe.XXX => must be the current universe file. XXX must be replaced with current epoch. (e.g universe.068)
• spectrum.XXX => must be the current spectrum file. XXX must be replaced with current epoch. (e.g spectrum.068)
• system => to start from scratch, use an empty file. (e.g. touch system)
• Bootx64.efi => boot loader
• statrup.nsh => UEFI start script
• Qubic.efi => the compiled qubic node code (efi executable)

the content of your startup.nsh could look like:

timezone -s 00:00
ifconfig -s eth0 dhcp
fs0:
cd efi
cd boot
Qubic.efi

• timezone -s 00:00 sets the timezone to utc
• ifconfig -s eth0 dhcp tells the efi to get an ip address from dhcp
• fs0: changes to drive 0
• Qubic.efi starts qubic

if you have multiple hard drives, the fs0: must changed to meet your environment.

to make it easier, you can copy & paste our prepared initial disk from https:/qubic-li/qubic/blob/main/qubic-initial-disk.zip

General Process of deploying a node

1. Find knownPublicPeers public peers (e.g. from: https://app.qubic.li/network/live)
2. Set the needed parameters inside qubic.cpp (https:/qubic-li/qubic/blob/main/qubic.cpp)
3. Compile Source to EFI
4. Start EFI Application on your Computer

How to run a Listening Node

To run a "listen-only" node, just add 3-4 known pulic peers to the code.

static const unsigned char knownPublicPeers[][4] = {
};

Compile with RELEASE.

How to run a Computor Node

1. Add your Computor Seed(s)

static unsigned char computorSeeds[][55 + 1] = {
    "aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa",
};

2. Add your Operator Identity The Operator Identity is used to identify the Operator. The Operator can send Commands to your Node.

#define OPERATOR "AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA"

3. Add 3-4 Known Public Peers (can be obtained from https://app.qubic.li/network/live)

static const unsigned char knownPublicPeers[][4] = {
  {12,13,14,12}
};

License

The Anti-Military License. See https:/computor-tools/qubic-js

Installation and Configuration

Please refer to https://docs.qubic.world

Limited Support

We cannot support you in any case. You are welcome to provide updates, bugfixes or other code changes by pull requests.