Skip to content

frontcover/SKL_Radar_FPGA

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

1 Commit
 
 
 
 
 
 

Repository files navigation

SKL Radar FPGA - ADC


Core: ZYNQ7000 - xc7z020clg484-1 (Zedboard)

ADC: ADS41B29


IP Register & Port

Interface Type : AXI4, AXI4-Stream

  • Control interface: AXI4 GP interface slave mode
  • Data interface: AXI4 HP Stream inteface master mode
  • Input port: 12 bit ADC interface
  • Output port: SPI communication interface
Register (Offset) Function Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0x00 SPI Status & Control nDone N/A N/A N/A Send Data Receive Load Data Reset
0x04 Output Data buffer Data[7] Data[6] Data[5] Data[4] Data[3] Data[2] Data[1] Data[0]
0x08 Read Data buffer Data[7] Data[6] Data[5] Data[4] Data[3] Data[2] Data[1] Data[0]
0x0C Transmit Limit
0x10 ADC Status N/A N/A N/A N/A N/A N/A N/A ADC Done
0x14 ADC Control N/A N/A N/A N/A N/A N/A N/A ADC Enable

Ports:

  • i_Trigger: External Trigger of ADC, trigger on falling edge
  • i_Mode: Debug External Control, data will be sequential data instead of ADC sampled data when logic low

Clock Configuration:

  • m00_axis_aclk: 250MHz
  • i_CMOS_Clk: 250MHz
  • s00_axi_aclk: 100MHz

Operation Method:

  • IO Trigger connected to IP and PS Input pin, PS will set 0x14 ADC Enable bitto 1 when ready to read data.
  • Data will be sample once the i_Trigger have the falling edge
  • Currently the data amount is fixed by define the value in IP
  • Data will be writen into RAM through DMA
  • PS will set the ADC Enable bit to 0 and wait until ready signal through user control

PS Configuration

Preripheral Enabled:

  • USB (Uart)
  • Ethernet
  • DMA

Ethernet setup

IP Address: 192.168.1.10

Protocal: TCP/IP

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published