HP Spectre x360 Hackintosh
Forked but heavily changed from https:/SeptemberHX/HP-Spectre-X360-13-late-2018-Hackintosh
- CPU: Core ™ i5-8265u
- BIOS F.42
- iGPU: Intel Graphics UHD 620
- RAM: 8GB
- Storage: TOSHIBA KXG50ZNV256G NVMe
- USB: USB3.2 Gen2 x 1 Thunderbolt 3 x 2
- WiFi: Intel Wireless AC 9560
- Bluetooth: VID 8087 PID 0AAA USB
- Trackpad: SYNA329A
- Touchpad: ELAN2514
- Default values, except
- Secure Boot Off
- Virtualization Enabled (You can disable then you don't need DisableIoMapper quirk in the config)
- Battery Remaining Enabled
DO NOT use the DSDT.aml in this repo. Follow tonymacx86 to create your own DSDT.aml
For more details in creating the EFI, following the link above.
For different model, please follow tonymacx86 to generate your own DSDT.aml, apply patches and put it back to EFI.
- I recommend you disable Automatically adjust backlight in display preferences if you want to use the brightness slider in quick controls!
- Go to safari preferences > Advanced
- Enable develop menu
- Go to Develop menu > Experimental Features > Enable WebRTC VP9 Codec
Note: If freezes occur elsewhere you can also try enabling H265 codec :)
To add Clover preloader to Boot menu you can create a new partition for Windows on the drive, install windows then
Thanks to ctxdl @tonymac
- Use EasyUefi in windows.
- Open EasyUEFI, and click on the button labeled “Manage EFI Boot Option”
- Click on the plus button alongside the list of boot entries to add a new entry
- Select “Linux or Other OS” in the Type menu
- Add a description for the bootloader entry, such as “Clover PreLoader”
- Select the EFI partition on your disk
- Now click the browse button, and browse to the CLOVER folder and select PreLoader.efi as the file
- Click OK to add the entry. Use the up and down arrows to set the priority of the boot entry if you’d like
- You can also adjust the boot order from BIOS.
You can create an aggregate audio device from Audio Midi Setup but an aggregate device will have no volume controls. To solve this you have three options.
- Loopback by rogue amoeba (the one i use) - https://rogueamoeba.com/loopback/ (100+ usd, expensive if you're not going to use it for anything else)
- MultiSoundChanger - https:/rlxone/MultiSoundChanger/ (free and open source)
- Sound Control by Static Z - https://staticz.com/soundcontrol/ (19 bucks but not sure if it works with big sur yet.)
- You tell me.
- Two sets of audio outputs need to be joined into one (see the note above)
- Fingerprint authentication sensor (synaptics)
- Battery remaining is unstable.
- Camera, detected but not working (lite-on camera)
- Facetime and Messages (probably can be fixed)
- Hibernation
- Press F4 to dump DSDT from Clover.
- Apply all DSDT Patches from this repo. Use latest MaciASL otherwise you get compilation errors.