add aspeed spi nor driver #31
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This driver adds mtd support for spi-nor attached to either or both of the Static Memory Controller (new registers) or the SPI Memory Controller. The static memory controller is the boot soruce for the SOC. The controller supports upto 5 chip selects in any combination of NAND, NOR, and SPI. The memory controller registers were updated in the AST2300 and this fmc binding is for the registers in the new mode. This driver currently supports only SPI-NOR attached memory, but has some consierations to support the others later (including choice of the Kconfig symbol). There is also a similar register set to suport the Static Memory Controller in a legacy address mode. That mode is not currently supported because it is expected that the system will run with the fmc binding supporting multiple chip selects. The normal aplication of the SPI memory controller is designated for use by the host system either for video bios or system bios and can be accessed over either an LPC bus and/or a PCIe bus. The SOC can also access this chip for firmware updates. This driver has only been tested with the ast2400 SOC. Signed-off-by: Milton Miller <[email protected]>
Enable the new spi-nor mtd driver. Signed-off-by: Milton Miller <[email protected]>
This patch updates the openpower palmetto BMC device tree to add a 32MB spi-nor to the static memory controller for the BMC use and a 32MB spi-nor to the SPI memory controller for the PNOR. The BMC nor has device tree partitions for u-boot, the uboot environment, the kernel, and the remaining space for an initrd. I kept the sizes matching what the current openbmc build is making. The current initrd is between 16 an 17MB and 29MB is allocated. The PNOR is given as one PNOR partition. There is no partitioning support in the current kernel for the ffs system used by openpower. Signed-off-by: Milton Miller <[email protected]>
nkskjames
pushed a commit
to nkskjames/linux
that referenced
this pull request
Jan 13, 2016
The following call trace is seen when generic/095 test is executed, WARNING: CPU: 3 PID: 2769 at /home/chandan/code/repos/linux/fs/btrfs/inode.c:8967 btrfs_destroy_inode+0x284/0x2a0() Modules linked in: CPU: 3 PID: 2769 Comm: umount Not tainted 4.2.0-rc5+ openbmc#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20150306_163512-brownie 04/01/2014 ffffffff81c08150 ffff8802ec9cbce8 ffffffff81984058 ffff8802ffd8feb0 0000000000000000 ffff8802ec9cbd28 ffffffff81050385 ffff8802ec9cbd38 ffff8802d12f8588 ffff8802d12f8588 ffff8802f15ab000 ffff8800bb96c0b0 Call Trace: [<ffffffff81984058>] dump_stack+0x45/0x57 [<ffffffff81050385>] warn_slowpath_common+0x85/0xc0 [<ffffffff81050465>] warn_slowpath_null+0x15/0x20 [<ffffffff81340294>] btrfs_destroy_inode+0x284/0x2a0 [<ffffffff8117ce07>] destroy_inode+0x37/0x60 [<ffffffff8117cf39>] evict+0x109/0x170 [<ffffffff8117cfd5>] dispose_list+0x35/0x50 [<ffffffff8117dd3a>] evict_inodes+0xaa/0x100 [<ffffffff81165667>] generic_shutdown_super+0x47/0xf0 [<ffffffff81165951>] kill_anon_super+0x11/0x20 [<ffffffff81302093>] btrfs_kill_super+0x13/0x110 [<ffffffff81165c99>] deactivate_locked_super+0x39/0x70 [<ffffffff811660cf>] deactivate_super+0x5f/0x70 [<ffffffff81180e1e>] cleanup_mnt+0x3e/0x90 [<ffffffff81180ebd>] __cleanup_mnt+0xd/0x10 [<ffffffff81069c06>] task_work_run+0x96/0xb0 [<ffffffff81003a3d>] do_notify_resume+0x3d/0x50 [<ffffffff8198cbc2>] int_signal+0x12/0x17 This means that the inode had non-zero "outstanding extents" during eviction. This occurs because, during direct I/O a task which successfully used up its reserved data space would set BTRFS_INODE_DIO_READY bit and does not clear the bit after finishing the DIO write. A future DIO write could actually fail and the unused reserve space won't be freed because of the previously set BTRFS_INODE_DIO_READY bit. Clearing the BTRFS_INODE_DIO_READY bit in btrfs_direct_IO() caused the following issue, |-----------------------------------+-------------------------------------| | Task A | Task B | |-----------------------------------+-------------------------------------| | Start direct i/o write on inode X.| | | reserve space | | | Allocate ordered extent | | | release reserved space | | | Set BTRFS_INODE_DIO_READY bit. | | | | splice() | | | Transfer data from pipe buffer to | | | destination file. | | | - kmap(pipe buffer page) | | | - Start direct i/o write on | | | inode X. | | | - reserve space | | | - dio_refill_pages() | | | - sdio->blocks_available == 0 | | | - Since a kernel address is | | | being passed instead of a | | | user space address, | | | iov_iter_get_pages() returns | | | -EFAULT. | | | - Since BTRFS_INODE_DIO_READY is | | | set, we don't release reserved | | | space. | | | - Clear BTRFS_INODE_DIO_READY bit.| | -EIOCBQUEUED is returned. | | |-----------------------------------+-------------------------------------| Hence this commit introduces "struct btrfs_dio_data" to track the usage of reserved data space. The remaining unused "reserve space" can now be freed reliably. Signed-off-by: Chandan Rajendra <[email protected]> Reviewed-by: Liu Bo <[email protected]> Signed-off-by: Chris Mason <[email protected]>
|
Replaced by updated request #43 |
shenki
pushed a commit
that referenced
this pull request
Jun 3, 2016
commit f7c17d2 upstream. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 16 at kernel/workqueue.c:4559 rebind_workers+0x1c0/0x1d0 Modules linked in: CPU: 0 PID: 16 Comm: cpuhp/0 Not tainted 4.6.0-rc4+ #31 Hardware name: IBM IBM System x3550 M4 Server -[7914IUW]-/00Y8603, BIOS -[D7E128FUS-1.40]- 07/23/2013 0000000000000000 ffff881037babb58 ffffffff8139d885 0000000000000010 0000000000000000 0000000000000000 0000000000000000 ffff881037babba8 ffffffff8108505d ffff881037ba0000 000011cf3e7d6e60 0000000000000046 Call Trace: dump_stack+0x89/0xd4 __warn+0xfd/0x120 warn_slowpath_null+0x1d/0x20 rebind_workers+0x1c0/0x1d0 workqueue_cpu_up_callback+0xf5/0x1d0 notifier_call_chain+0x64/0x90 ? trace_hardirqs_on_caller+0xf2/0x220 ? notify_prepare+0x80/0x80 __raw_notifier_call_chain+0xe/0x10 __cpu_notify+0x35/0x50 notify_down_prepare+0x5e/0x80 ? notify_prepare+0x80/0x80 cpuhp_invoke_callback+0x73/0x330 ? __schedule+0x33e/0x8a0 cpuhp_down_callbacks+0x51/0xc0 cpuhp_thread_fun+0xc1/0xf0 smpboot_thread_fn+0x159/0x2a0 ? smpboot_create_threads+0x80/0x80 kthread+0xef/0x110 ? wait_for_completion+0xf0/0x120 ? schedule_tail+0x35/0xf0 ret_from_fork+0x22/0x50 ? __init_kthread_worker+0x70/0x70 ---[ end trace eb12ae47d2382d8f ]--- notify_down_prepare: attempt to take down CPU 0 failed This bug can be reproduced by below config w/ nohz_full= all cpus: CONFIG_BOOTPARAM_HOTPLUG_CPU0=y CONFIG_DEBUG_HOTPLUG_CPU0=y CONFIG_NO_HZ_FULL=y As Thomas pointed out: | If a down prepare callback fails, then DOWN_FAILED is invoked for all | callbacks which have successfully executed DOWN_PREPARE. | | But, workqueue has actually two notifiers. One which handles | UP/DOWN_FAILED/ONLINE and one which handles DOWN_PREPARE. | | Now look at the priorities of those callbacks: | | CPU_PRI_WORKQUEUE_UP = 5 | CPU_PRI_WORKQUEUE_DOWN = -5 | | So the call order on DOWN_PREPARE is: | | CB 1 | CB ... | CB workqueue_up() -> Ignores DOWN_PREPARE | CB ... | CB X ---> Fails | | So we call up to CB X with DOWN_FAILED | | CB 1 | CB ... | CB workqueue_up() -> Handles DOWN_FAILED | CB ... | CB X-1 | | So the problem is that the workqueue stuff handles DOWN_FAILED in the up | callback, while it should do it in the down callback. Which is not a good idea | either because it wants to be called early on rollback... | | Brilliant stuff, isn't it? The hotplug rework will solve this problem because | the callbacks become symetric, but for the existing mess, we need some | workaround in the workqueue code. The boot CPU handles housekeeping duty(unbound timers, workqueues, timekeeping, ...) on behalf of full dynticks CPUs. It must remain online when nohz full is enabled. There is a priority set to every notifier_blocks: workqueue_cpu_up > tick_nohz_cpu_down > workqueue_cpu_down So tick_nohz_cpu_down callback failed when down prepare cpu 0, and notifier_blocks behind tick_nohz_cpu_down will not be called any more, which leads to workers are actually not unbound. Then hotplug state machine will fallback to undo and online cpu 0 again. Workers will be rebound unconditionally even if they are not unbound and trigger the warning in this progress. This patch fix it by catching !DISASSOCIATED to avoid rebind bound workers. Cc: Tejun Heo <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Frédéric Weisbecker <[email protected]> Suggested-by: Lai Jiangshan <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Jun 8, 2016
commit 7ccca1d upstream. Fix possible out of bounds read, by adding missing comma. The code may read pass the end of the dsi_errors array when the most significant bit (bit #31) in the intr_stat register is set. This bug has been detected using CppCheck (static analysis tool). Signed-off-by: Itai Handler <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Jul 22, 2016
commit 7ccca1d upstream. Fix possible out of bounds read, by adding missing comma. The code may read pass the end of the dsi_errors array when the most significant bit (bit #31) in the intr_stat register is set. This bug has been detected using CppCheck (static analysis tool). Signed-off-by: Itai Handler <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Aug 15, 2018
[ Upstream commit 4b19067 ] When attempt to read tpc_stats for the chipsets which support more than 3 tx chain will trigger kernel panic(kernel stack is corrupted) due to writing values on rate_code array out of range. This patch changes the array size depends on the WMI_TPC_TX_N_CHAIN and added check to avoid write values on the array if the num tx chain get in tpc config event is greater than WMI_TPC_TX_N_CHAIN. Tested on QCA9984 with firmware-5.bin_10.4-3.5.3-00057 Kernel panic log : [ 323.510944] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: bf90c654 [ 323.510944] [ 323.524390] CPU: 0 PID: 1908 Comm: cat Not tainted 3.14.77 #31 [ 323.530224] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.537941] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.545146] [<c03c53c0>] (dump_stack) from [<c022e4ac>] (panic+0x84/0x1e4) [ 323.552000] [<c022e4ac>] (panic) from [<c022e61c>] (__stack_chk_fail+0x10/0x14) [ 323.559350] [<c022e61c>] (__stack_chk_fail) from [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config+0x424/0x438 [ath10k_core]) [ 323.570471] [<bf90c654>] (ath10k_wmi_event_pdev_tpc_config [ath10k_core]) from [<bf90d800>] (ath10k_wmi_10_4_op_rx+0x2f0/0x39c [ath10k_core]) [ 323.583047] [<bf90d800>] (ath10k_wmi_10_4_op_rx [ath10k_core]) from [<bf8fcc18>] (ath10k_htc_rx_completion_handler+0x170/0x1a0 [ath10k_core]) [ 323.595702] [<bf8fcc18>] (ath10k_htc_rx_completion_handler [ath10k_core]) from [<bf961f44>] (ath10k_pci_hif_send_complete_check+0x1f0/0x220 [ath10k_pci]) [ 323.609421] [<bf961f44>] (ath10k_pci_hif_send_complete_check [ath10k_pci]) from [<bf96562c>] (ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]) [ 323.622490] [<bf96562c>] (ath10k_ce_per_engine_service [ath10k_pci]) from [<bf9656f0>] (ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]) [ 323.635423] [<bf9656f0>] (ath10k_ce_per_engine_service_any [ath10k_pci]) from [<bf96365c>] (ath10k_pci_napi_poll+0x44/0xe8 [ath10k_pci]) [ 323.647665] [<bf96365c>] (ath10k_pci_napi_poll [ath10k_pci]) from [<c0599994>] (net_rx_action+0xac/0x160) [ 323.657208] [<c0599994>] (net_rx_action) from [<c02324a4>] (__do_softirq+0x104/0x294) [ 323.665017] [<c02324a4>] (__do_softirq) from [<c0232920>] (irq_exit+0x9c/0x11c) [ 323.672314] [<c0232920>] (irq_exit) from [<c0217fc0>] (handle_IRQ+0x6c/0x90) [ 323.679341] [<c0217fc0>] (handle_IRQ) from [<c02084e0>] (gic_handle_irq+0x3c/0x60) [ 323.686893] [<c02084e0>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.694349] Exception stack(0xdd489c58 to 0xdd489ca0) [ 323.699384] 9c40: 00000000 a0000013 [ 323.707547] 9c60: 00000000 dc4bce40 60000013 ddc1d800 dd488000 00000990 00000000 c085c800 [ 323.715707] 9c80: 00000000 dd489d44 0000092d dd489ca0 c026e664 c026e668 60000013 ffffffff [ 323.723877] [<c02095c0>] (__irq_svc) from [<c026e668>] (rcu_note_context_switch+0x170/0x184) [ 323.732298] [<c026e668>] (rcu_note_context_switch) from [<c020e928>] (__schedule+0x50/0x4d4) [ 323.740716] [<c020e928>] (__schedule) from [<c020e490>] (schedule_timeout+0x148/0x178) [ 323.748611] [<c020e490>] (schedule_timeout) from [<c020f804>] (wait_for_common+0x114/0x154) [ 323.756972] [<c020f804>] (wait_for_common) from [<bf8f6ef0>] (ath10k_tpc_stats_open+0xc8/0x340 [ath10k_core]) [ 323.766873] [<bf8f6ef0>] (ath10k_tpc_stats_open [ath10k_core]) from [<c02bb598>] (do_dentry_open+0x1ac/0x274) [ 323.776741] [<c02bb598>] (do_dentry_open) from [<c02c838c>] (do_last+0x8c0/0xb08) [ 323.784201] [<c02c838c>] (do_last) from [<c02c87e4>] (path_openat+0x210/0x598) [ 323.791408] [<c02c87e4>] (path_openat) from [<c02c9d1c>] (do_filp_open+0x2c/0x78) [ 323.798873] [<c02c9d1c>] (do_filp_open) from [<c02bc85c>] (do_sys_open+0x114/0x1b4) [ 323.806509] [<c02bc85c>] (do_sys_open) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) [ 323.814241] CPU1: stopping [ 323.816927] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.77 #31 [ 323.823008] [<c021db48>] (unwind_backtrace) from [<c021ac08>] (show_stack+0x10/0x14) [ 323.830731] [<c021ac08>] (show_stack) from [<c03c53c0>] (dump_stack+0x80/0xa0) [ 323.837934] [<c03c53c0>] (dump_stack) from [<c021cfac>] (handle_IPI+0xb8/0x140) [ 323.845224] [<c021cfac>] (handle_IPI) from [<c02084fc>] (gic_handle_irq+0x58/0x60) [ 323.852774] [<c02084fc>] (gic_handle_irq) from [<c02095c0>] (__irq_svc+0x40/0x70) [ 323.860233] Exception stack(0xdd499fa0 to 0xdd499fe8) [ 323.865273] 9fa0: ffffffed 00000000 1d3c9000 00000000 dd498000 dd498030 10c0387d c08b62c8 [ 323.873432] 9fc0: 4220406a 512f04d0 00000000 00000000 00000001 dd499fe8 c021838c c0218390 [ 323.881588] 9fe0: 60000013 ffffffff [ 323.885070] [<c02095c0>] (__irq_svc) from [<c0218390>] (arch_cpu_idle+0x30/0x50) [ 323.892454] [<c0218390>] (arch_cpu_idle) from [<c026500c>] (cpu_startup_entry+0xa4/0x108) [ 323.900690] [<c026500c>] (cpu_startup_entry) from [<422085a4>] (0x422085a4) Signed-off-by: Tamizh chelvam <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
May 27, 2019
commit a3eec13 upstream. When using direct commands (DCMDs) on an RK3399, we get spurious CQE completion interrupts for the DCMD transaction slot (#31): [ 931.196520] ------------[ cut here ]------------ [ 931.201702] mmc1: cqhci: spurious TCN for tag 31 [ 931.206906] WARNING: CPU: 0 PID: 1433 at /usr/src/kernel/drivers/mmc/host/cqhci.c:725 cqhci_irq+0x2e4/0x490 [ 931.206909] Modules linked in: [ 931.206918] CPU: 0 PID: 1433 Comm: irq/29-mmc1 Not tainted 4.19.8-rt6-funkadelic #1 [ 931.206920] Hardware name: Theobroma Systems RK3399-Q7 SoM (DT) [ 931.206924] pstate: 40000005 (nZcv daif -PAN -UAO) [ 931.206927] pc : cqhci_irq+0x2e4/0x490 [ 931.206931] lr : cqhci_irq+0x2e4/0x490 [ 931.206933] sp : ffff00000e54bc80 [ 931.206934] x29: ffff00000e54bc80 x28: 0000000000000000 [ 931.206939] x27: 0000000000000001 x26: ffff000008f217e8 [ 931.206944] x25: ffff8000f02ef030 x24: ffff0000091417b0 [ 931.206948] x23: ffff0000090aa000 x22: ffff8000f008b000 [ 931.206953] x21: 0000000000000002 x20: 000000000000001f [ 931.206957] x19: ffff8000f02ef018 x18: ffffffffffffffff [ 931.206961] x17: 0000000000000000 x16: 0000000000000000 [ 931.206966] x15: ffff0000090aa6c8 x14: 0720072007200720 [ 931.206970] x13: 0720072007200720 x12: 0720072007200720 [ 931.206975] x11: 0720072007200720 x10: 0720072007200720 [ 931.206980] x9 : 0720072007200720 x8 : 0720072007200720 [ 931.206984] x7 : 0720073107330720 x6 : 00000000000005a0 [ 931.206988] x5 : ffff00000860d4b0 x4 : 0000000000000000 [ 931.206993] x3 : 0000000000000001 x2 : 0000000000000001 [ 931.206997] x1 : 1bde3a91b0d4d900 x0 : 0000000000000000 [ 931.207001] Call trace: [ 931.207005] cqhci_irq+0x2e4/0x490 [ 931.207009] sdhci_arasan_cqhci_irq+0x5c/0x90 [ 931.207013] sdhci_irq+0x98/0x930 [ 931.207019] irq_forced_thread_fn+0x2c/0xa0 [ 931.207023] irq_thread+0x114/0x1c0 [ 931.207027] kthread+0x128/0x130 [ 931.207032] ret_from_fork+0x10/0x20 [ 931.207035] ---[ end trace 0000000000000002 ]--- The driver shows this message only for the first spurious interrupt by using WARN_ONCE(). Changing this to WARN() shows, that this is happening quite frequently (up to once a second). Since the eMMC 5.1 specification, where CQE and CQHCI are specified, does not mention that spurious TCN interrupts for DCMDs can be simply ignored, we must assume that using this feature is not working reliably. The current implementation uses DCMD for REQ_OP_FLUSH only, and I could not see any performance/power impact when disabling this optional feature for RK3399. Therefore this patch disables DCMDs for RK3399. Signed-off-by: Christoph Muellner <[email protected]> Signed-off-by: Philipp Tomsich <[email protected]> Fixes: 84362d7 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: [email protected] [the corresponding code changes are queued for 5.2 so doing that as well] Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
amboar
pushed a commit
to amboar/linux
that referenced
this pull request
Jul 11, 2019
Setting invalid value to /sys/devices/system/cpu/cpuX/hotplug/fail can control `struct cpuhp_step *sp` address, results in the following global-out-of-bounds read. Reproducer: # echo -2 > /sys/devices/system/cpu/cpu0/hotplug/fail KASAN report: BUG: KASAN: global-out-of-bounds in write_cpuhp_fail+0x2cd/0x2e0 Read of size 8 at addr ffffffff89734438 by task bash/1941 CPU: 0 PID: 1941 Comm: bash Not tainted 5.2.0-rc6+ openbmc#31 Call Trace: write_cpuhp_fail+0x2cd/0x2e0 dev_attr_store+0x58/0x80 sysfs_kf_write+0x13d/0x1a0 kernfs_fop_write+0x2bc/0x460 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f05e4f4c970 The buggy address belongs to the variable: cpu_hotplug_lock+0x98/0xa0 Memory state around the buggy address: ffffffff89734300: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734380: fa fa fa fa 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff89734400: 00 00 00 00 fa fa fa fa 00 00 00 00 fa fa fa fa ^ ffffffff89734480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff89734500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Add a sanity check for the value written from user space. Fixes: 1db4948 ("smp/hotplug: Hotplug state fail injection") Signed-off-by: Eiichi Tsukata <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
shenki
pushed a commit
that referenced
this pull request
Nov 11, 2019
commit abdd3d0 upstream. Original version of g920_get_config() contained two kind of actions: 1. Device specific communication to query/set some parameters which requires active communication channel with the device, or, put in other way, for the call to be sandwiched between hid_device_io_start() and hid_device_io_stop(). 2. Input subsystem specific FF controller initialization which, in order to access a valid 'struct hid_input' via 'hid->inputs.next', requires claimed hidinput which means be executed after the call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Location of g920_get_config() can only fulfill requirements for #1 and not #2, which might result in following backtrace: [ 88.312258] logitech-hidpp-device 0003:046D:C262.0005: HID++ 4.2 device connected. [ 88.320298] BUG: kernel NULL pointer dereference, address: 0000000000000018 [ 88.320304] #PF: supervisor read access in kernel mode [ 88.320307] #PF: error_code(0x0000) - not-present page [ 88.320309] PGD 0 P4D 0 [ 88.320315] Oops: 0000 [#1] SMP PTI [ 88.320320] CPU: 1 PID: 3080 Comm: systemd-udevd Not tainted 5.4.0-rc1+ #31 [ 88.320322] Hardware name: Apple Inc. MacBookPro11,1/Mac-189A3D4F975D5FFC, BIOS 149.0.0.0.0 09/17/2018 [ 88.320334] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320338] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320341] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320345] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320347] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320350] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320352] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320354] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320358] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320361] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320363] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 [ 88.320366] Call Trace: [ 88.320377] ? _cond_resched+0x15/0x30 [ 88.320387] ? create_pinctrl+0x2f/0x3c0 [ 88.320393] ? kernfs_link_sibling+0x94/0xe0 [ 88.320398] ? _cond_resched+0x15/0x30 [ 88.320402] ? kernfs_activate+0x5f/0x80 [ 88.320406] ? kernfs_add_one+0xe2/0x130 [ 88.320411] hid_device_probe+0x106/0x170 [ 88.320419] really_probe+0x147/0x3c0 [ 88.320424] driver_probe_device+0xb6/0x100 [ 88.320428] device_driver_attach+0x53/0x60 [ 88.320433] __driver_attach+0x8a/0x150 [ 88.320437] ? device_driver_attach+0x60/0x60 [ 88.320440] bus_for_each_dev+0x78/0xc0 [ 88.320445] bus_add_driver+0x14d/0x1f0 [ 88.320450] driver_register+0x6c/0xc0 [ 88.320453] ? 0xffffffffc0d67000 [ 88.320457] __hid_register_driver+0x4c/0x80 [ 88.320464] do_one_initcall+0x46/0x1f4 [ 88.320469] ? _cond_resched+0x15/0x30 [ 88.320474] ? kmem_cache_alloc_trace+0x162/0x220 [ 88.320481] ? do_init_module+0x23/0x230 [ 88.320486] do_init_module+0x5c/0x230 [ 88.320491] load_module+0x26e1/0x2990 [ 88.320502] ? ima_post_read_file+0xf0/0x100 [ 88.320508] ? __do_sys_finit_module+0xaa/0x110 [ 88.320512] __do_sys_finit_module+0xaa/0x110 [ 88.320520] do_syscall_64+0x5b/0x180 [ 88.320525] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 88.320528] RIP: 0033:0x7f8d8d1f01fd [ 88.320532] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5b 8c 0c 00 f7 d8 64 89 01 48 [ 88.320535] RSP: 002b:00007ffefa3bb068 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 88.320539] RAX: ffffffffffffffda RBX: 000055922040cb40 RCX: 00007f8d8d1f01fd [ 88.320541] RDX: 0000000000000000 RSI: 00007f8d8ce4984d RDI: 0000000000000006 [ 88.320543] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000007 [ 88.320545] R10: 0000000000000006 R11: 0000000000000246 R12: 00007f8d8ce4984d [ 88.320547] R13: 0000000000000000 R14: 000055922040efc0 R15: 000055922040cb40 [ 88.320551] Modules linked in: hid_logitech_hidpp(+) fuse rfcomm ccm xt_CHECKSUM xt_MASQUERADE bridge stp llc nf_nat_tftp nf_conntrack_tftp nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat tun iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables cmac bnep sunrpc dm_crypt nls_utf8 hfsplus intel_rapl_msr intel_rapl_common ath9k_htc ath9k_common x86_pkg_temp_thermal intel_powerclamp b43 ath9k_hw coretemp snd_hda_codec_hdmi cordic kvm_intel snd_hda_codec_cirrus mac80211 snd_hda_codec_generic ledtrig_audio kvm snd_hda_intel snd_intel_nhlt irqbypass snd_hda_codec btusb btrtl snd_hda_core ath btbcm ssb snd_hwdep btintel snd_seq crct10dif_pclmul iTCO_wdt snd_seq_device crc32_pclmul bluetooth mmc_core iTCO_vendor_support joydev cfg80211 [ 88.320602] applesmc ghash_clmulni_intel ecdh_generic snd_pcm input_polldev intel_cstate ecc intel_uncore thunderbolt snd_timer i2c_i801 libarc4 rfkill intel_rapl_perf lpc_ich mei_me pcspkr bcm5974 snd bcma mei soundcore acpi_als sbs kfifo_buf sbshc industrialio apple_bl i915 i2c_algo_bit drm_kms_helper drm uas crc32c_intel usb_storage video hid_apple [ 88.320630] CR2: 0000000000000018 [ 88.320633] ---[ end trace 933491c8a4fadeb7 ]--- [ 88.320642] RIP: 0010:hidpp_probe+0x61f/0x948 [hid_logitech_hidpp] [ 88.320645] Code: 81 00 00 48 89 ef e8 f0 d6 ff ff 41 89 c6 85 c0 75 b5 0f b6 44 24 28 48 8b 5d 00 88 44 24 1e 89 44 24 0c 48 8b 83 18 1c 00 00 <48> 8b 48 18 48 8b 83 10 19 00 00 48 8b 40 40 48 89 0c 24 0f b7 80 [ 88.320647] RSP: 0018:ffffb0a6824aba68 EFLAGS: 00010246 [ 88.320650] RAX: 0000000000000000 RBX: ffff93a50756e000 RCX: 0000000000010408 [ 88.320652] RDX: 0000000000000000 RSI: ffff93a51f0ad0a0 RDI: 000000000002d0a0 [ 88.320655] RBP: ffff93a50416da28 R08: ffff93a50416da70 R09: ffff93a50416da70 [ 88.320657] R10: 000000148ae9e60c R11: 00000000000f1525 R12: ffff93a50756e000 [ 88.320659] R13: ffff93a50756f8d0 R14: 0000000000000000 R15: ffff93a50756fc38 [ 88.320662] FS: 00007f8d8c1e0940(0000) GS:ffff93a51f080000(0000) knlGS:0000000000000000 [ 88.320664] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 88.320667] CR2: 0000000000000018 CR3: 00000003996d8003 CR4: 00000000001606e0 To solve this issue: 1. Split g920_get_config() such that all of the device specific communication remains a part of the function and input subsystem initialization bits go to hidpp_ff_init() 2. Move call to hidpp_ff_init() from being a part of g920_get_config() to be the last step of .probe(), right after a call to hid_hw_start() with connect_mask containing HID_CONNECT_HIDINPUT. Fixes: 91cf9a9 ("HID: logitech-hidpp: make .probe usbhid capable") Signed-off-by: Andrey Smirnov <[email protected]> Tested-by: Sam Bazley <[email protected]> Cc: Jiri Kosina <[email protected]> Cc: Benjamin Tissoires <[email protected]> Cc: Henrik Rydberg <[email protected]> Cc: Pierre-Loup A. Griffais <[email protected]> Cc: Austin Palmer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # 5.2+ Signed-off-by: Benjamin Tissoires <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
May 5, 2020
commit e5b72e3 upstream. Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use #31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: [email protected] # v4.9+ Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
May 24, 2021
[ Upstream commit 0f20615 ] Fix BPF_CORE_READ_BITFIELD() macro used for reading CO-RE-relocatable bitfields. Missing breaks in a switch caused 8-byte reads always. This can confuse libbpf because it does strict checks that memory load size corresponds to the original size of the field, which in this case quite often would be wrong. After fixing that, we run into another problem, which quite subtle, so worth documenting here. The issue is in Clang optimization and CO-RE relocation interactions. Without that asm volatile construct (also known as barrier_var()), Clang will re-order BYTE_OFFSET and BYTE_SIZE relocations and will apply BYTE_OFFSET 4 times for each switch case arm. This will result in the same error from libbpf about mismatch of memory load size and original field size. I.e., if we were reading u32, we'd still have *(u8 *), *(u16 *), *(u32 *), and *(u64 *) memory loads, three of which will fail. Using barrier_var() forces Clang to apply BYTE_OFFSET relocation first (and once) to calculate p, after which value of p is used without relocation in each of switch case arms, doing appropiately-sized memory load. Here's the list of relevant relocations and pieces of generated BPF code before and after this patch for test_core_reloc_bitfields_direct selftests. BEFORE ===== #45: core_reloc: insn #160 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 #46: core_reloc: insn #167 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #47: core_reloc: insn #174 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #48: core_reloc: insn #178 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #49: core_reloc: insn #182 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 157: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 159: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 160: b7 02 00 00 04 00 00 00 r2 = 4 ; BYTE_SIZE relocation here ^^^ 161: 66 02 07 00 03 00 00 00 if w2 s> 3 goto +7 <LBB0_63> 162: 16 02 0d 00 01 00 00 00 if w2 == 1 goto +13 <LBB0_65> 163: 16 02 01 00 02 00 00 00 if w2 == 2 goto +1 <LBB0_66> 164: 05 00 12 00 00 00 00 00 goto +18 <LBB0_69> 0000000000000528 <LBB0_66>: 165: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 167: 69 11 08 00 00 00 00 00 r1 = *(u16 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 168: 05 00 0e 00 00 00 00 00 goto +14 <LBB0_69> 0000000000000548 <LBB0_63>: 169: 16 02 0a 00 04 00 00 00 if w2 == 4 goto +10 <LBB0_67> 170: 16 02 01 00 08 00 00 00 if w2 == 8 goto +1 <LBB0_68> 171: 05 00 0b 00 00 00 00 00 goto +11 <LBB0_69> 0000000000000560 <LBB0_68>: 172: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 174: 79 11 08 00 00 00 00 00 r1 = *(u64 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 175: 05 00 07 00 00 00 00 00 goto +7 <LBB0_69> 0000000000000580 <LBB0_65>: 176: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 178: 71 11 08 00 00 00 00 00 r1 = *(u8 *)(r1 + 8) ; BYTE_OFFSET relo here w/ WRONG size ^^^^^^^^^^^^^^^^ 179: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 00000000000005a0 <LBB0_67>: 180: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll 182: 61 11 08 00 00 00 00 00 r1 = *(u32 *)(r1 + 8) ; BYTE_OFFSET relo here w/ RIGHT size ^^^^^^^^^^^^^^^^ 00000000000005b8 <LBB0_69>: 183: 67 01 00 00 20 00 00 00 r1 <<= 32 184: b7 02 00 00 00 00 00 00 r2 = 0 185: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 186: c7 01 00 00 20 00 00 00 r1 s>>= 32 187: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000005e0 <LBB0_71>: 188: 77 01 00 00 20 00 00 00 r1 >>= 32 AFTER ===== #30: core_reloc: insn #132 --> [5] + 0:5: byte_off --> struct core_reloc_bitfields.u32 #31: core_reloc: insn #134 --> [5] + 0:5: byte_sz --> struct core_reloc_bitfields.u32 129: 18 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r2 = 0 ll 131: 7b 12 20 01 00 00 00 00 *(u64 *)(r2 + 288) = r1 132: b7 01 00 00 08 00 00 00 r1 = 8 ; BYTE_OFFSET relo here ^^^ ; no size check for non-memory dereferencing instructions 133: 0f 12 00 00 00 00 00 00 r2 += r1 134: b7 03 00 00 04 00 00 00 r3 = 4 ; BYTE_SIZE relocation here ^^^ 135: 66 03 05 00 03 00 00 00 if w3 s> 3 goto +5 <LBB0_63> 136: 16 03 09 00 01 00 00 00 if w3 == 1 goto +9 <LBB0_65> 137: 16 03 01 00 02 00 00 00 if w3 == 2 goto +1 <LBB0_66> 138: 05 00 0a 00 00 00 00 00 goto +10 <LBB0_69> 0000000000000458 <LBB0_66>: 139: 69 21 00 00 00 00 00 00 r1 = *(u16 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 140: 05 00 08 00 00 00 00 00 goto +8 <LBB0_69> 0000000000000468 <LBB0_63>: 141: 16 03 06 00 04 00 00 00 if w3 == 4 goto +6 <LBB0_67> 142: 16 03 01 00 08 00 00 00 if w3 == 8 goto +1 <LBB0_68> 143: 05 00 05 00 00 00 00 00 goto +5 <LBB0_69> 0000000000000480 <LBB0_68>: 144: 79 21 00 00 00 00 00 00 r1 = *(u64 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 145: 05 00 03 00 00 00 00 00 goto +3 <LBB0_69> 0000000000000490 <LBB0_65>: 146: 71 21 00 00 00 00 00 00 r1 = *(u8 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 147: 05 00 01 00 00 00 00 00 goto +1 <LBB0_69> 00000000000004a0 <LBB0_67>: 148: 61 21 00 00 00 00 00 00 r1 = *(u32 *)(r2 + 0) ; NO CO-RE relocation here ^^^^^^^^^^^^^^^^ 00000000000004a8 <LBB0_69>: 149: 67 01 00 00 20 00 00 00 r1 <<= 32 150: b7 02 00 00 00 00 00 00 r2 = 0 151: 16 02 02 00 00 00 00 00 if w2 == 0 goto +2 <LBB0_71> 152: c7 01 00 00 20 00 00 00 r1 s>>= 32 153: 05 00 01 00 00 00 00 00 goto +1 <LBB0_72> 00000000000004d0 <LBB0_71>: 154: 77 01 00 00 20 00 00 00 r1 >>= 323 Fixes: ee26dad ("libbpf: Add support for relocatable bitfields") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Lorenz Bauer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Aug 19, 2021
commit 16a200f upstream. A fstrim on a degraded raid1 can trigger the following null pointer dereference: BTRFS info (device loop0): allowing degraded mounts BTRFS info (device loop0): disk space caching is enabled BTRFS info (device loop0): has skinny extents BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS warning (device loop0): devid 2 uuid 97ac16f7-e14d-4db1-95bc-3d489b424adb is missing BTRFS info (device loop0): enabling ssd optimizations BUG: kernel NULL pointer dereference, address: 0000000000000620 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 4574 Comm: fstrim Not tainted 5.13.0-rc7+ #31 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:btrfs_trim_fs+0x199/0x4a0 [btrfs] RSP: 0018:ffff959541797d28 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff946f84eca508 RCX: a7a67937adff8608 RDX: ffff946e8122d000 RSI: 0000000000000000 RDI: ffffffffc02fdbf0 RBP: ffff946ea4615000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffff946e8122d960 R12: 0000000000000000 R13: ffff959541797db8 R14: ffff946e8122d000 R15: ffff959541797db8 FS: 00007f55917a5080(0000) GS:ffff946f9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000620 CR3: 000000002d2c8001 CR4: 00000000000706f0 Call Trace: btrfs_ioctl_fitrim+0x167/0x260 [btrfs] btrfs_ioctl+0x1c00/0x2fe0 [btrfs] ? selinux_file_ioctl+0x140/0x240 ? syscall_trace_enter.constprop.0+0x188/0x240 ? __x64_sys_ioctl+0x83/0xb0 __x64_sys_ioctl+0x83/0xb0 Reproducer: $ mkfs.btrfs -fq -d raid1 -m raid1 /dev/loop0 /dev/loop1 $ mount /dev/loop0 /btrfs $ umount /btrfs $ btrfs dev scan --forget $ mount -o degraded /dev/loop0 /btrfs $ fstrim /btrfs The reason is we call btrfs_trim_free_extents() for the missing device, which uses device->bdev (NULL for missing device) to find if the device supports discard. Fix is to check if the device is missing before calling btrfs_trim_free_extents(). CC: [email protected] # 5.4+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Anand Jain <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Sep 20, 2021
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Sep 22, 2021
[ Upstream commit 240e126 ] uart_handle_dcd_change() requires a port lock to be held and will emit a warning when lockdep is enabled. Held corresponding lock to fix the following warnings. [ 132.528648] WARNING: CPU: 5 PID: 11600 at drivers/tty/serial/serial_core.c:3046 uart_handle_dcd_change+0xf4/0x120 [ 132.530482] Modules linked in: [ 132.531050] CPU: 5 PID: 11600 Comm: jsm Not tainted 5.14.0-rc1-00003-g7fef2edf7cc7-dirty #31 [ 132.535268] RIP: 0010:uart_handle_dcd_change+0xf4/0x120 [ 132.557100] Call Trace: [ 132.557562] ? __free_pages+0x83/0xb0 [ 132.558213] neo_parse_modem+0x156/0x220 [ 132.558897] neo_param+0x399/0x840 [ 132.559495] jsm_tty_open+0x12f/0x2d0 [ 132.560131] uart_startup.part.18+0x153/0x340 [ 132.560888] ? lock_is_held_type+0xe9/0x140 [ 132.561660] uart_port_activate+0x7f/0xe0 [ 132.562351] ? uart_startup.part.18+0x340/0x340 [ 132.563003] tty_port_open+0x8d/0xf0 [ 132.563523] ? uart_set_options+0x1e0/0x1e0 [ 132.564125] uart_open+0x24/0x40 [ 132.564604] tty_open+0x15c/0x630 Signed-off-by: Zheyu Ma <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
shenki
pushed a commit
that referenced
this pull request
Nov 25, 2021
[ Upstream commit d412137 ] The perf_buffer fails on system with offline cpus: # test_progs -t perf_buffer test_perf_buffer:PASS:nr_cpus 0 nsec test_perf_buffer:PASS:nr_on_cpus 0 nsec test_perf_buffer:PASS:skel_load 0 nsec test_perf_buffer:PASS:attach_kprobe 0 nsec test_perf_buffer:PASS:perf_buf__new 0 nsec test_perf_buffer:PASS:epoll_fd 0 nsec skipping offline CPU #24 skipping offline CPU #25 skipping offline CPU #26 skipping offline CPU #27 skipping offline CPU #28 skipping offline CPU #29 skipping offline CPU #30 skipping offline CPU #31 test_perf_buffer:PASS:perf_buffer__poll 0 nsec test_perf_buffer:PASS:seen_cpu_cnt 0 nsec test_perf_buffer:FAIL:buf_cnt got 24, expected 32 Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED Changing the test to check online cpus instead of possible. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>
amboar
pushed a commit
that referenced
this pull request
Mar 14, 2024
[ Upstream commit a7d6027 ] syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
dkodihal
pushed a commit
to NVIDIA/linux
that referenced
this pull request
Aug 21, 2024
commit a7d6027 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 openbmc#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
dkodihal
pushed a commit
to NVIDIA/linux
that referenced
this pull request
Oct 15, 2024
[ Upstream commit a7d6027 ] syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 openbmc#31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <[email protected]> Reported-by: Bjoern Doebel <[email protected]> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is the initial driver along with palmetto support.
Future work includes memcopy access, speed settings, and parse all flash parameters.