README

This README would normally document whatever steps are necessary to get your application up and running.

What is this repository for?

• The repository is used as VCS for the ESP32 IOT Project

How do I get set up?

• The setup is composed by the ESP32 chip on its board plus another board acting as a USB to serial converter (LC tech company)
• Ide for the development is Visual Studio Code.
• The project was developed adding the extension PlatformIO from Visual Studio code.
• On the file platformio.ini you can find all the information related to the project and used external libraries
• For installing new libraries click on the PlatformIO icon then look for the Quick search menu and look for PIO Home (libraries). Search and install the library you need.
• For Building ,Uploading and Monitor click on the PlatformIO icon and under the menu esp32dev search for General.
• For Loading remember to keep pressed the reset buttons on the converter and on the esp32 module
• When monitoring remember to change the serial baud rate to 115200
• The MCU is Espressif ESP32WROOMSE
• Toolchain is xtensa32 2.50200.97
• For the deployment refer to the confluence pages of the project

Contribution guidelines

• Code review is performed by default review

Who do I talk to?

• Simone Gasparella [email protected]