Skip to content

troubleshooting scripts for cisco devices connected to a t1 or metro WAN

Notifications You must be signed in to change notification settings

sudorob0/cisco_troubleshooting_scripts

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 
 
 
 
 

Repository files navigation

cisco_troubleshooting

This is a readme for cisco trouble shooting repo

These scripts are only for cisco equipment only. These scripts are to allow for quick and easy troubleshooting for metro ethernet and t1 circuit issues. The scripts will get the necessary information and condense it into an easy to read output.

First the output for the T1 script should look like the our put below The uptime, bgp uptime and gatway are grouped together so you can compare the times and routes to look for bouncing. Then you can see what interfaces/ circuits are up and if they are taking errors. You also get ping response times.

------- Router uptime + BGP Status + Gateway ------

XXXXXXX uptime is 21 weeks, 4 days, 15 hours, 58 minutes

Gateway of last resort is 10.1.1.1 to network 0.0.0.0

Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd

10.1.1.1 4 13979 218397 240351 6 0 0 21w4d 1

------- Tunnel + Interface Status ------

Tunnel0 10.1.1.2 YES unset up up

Tunnel1 10.1.1.3 YES TFTP up down

Gi0/1 up up Backup connection to Cradle-Point

------- Bundle ------

Member links: 3 active, 0 inactive (max 255, min not set)

Se0/0/0:0, since 21w4d
Se0/0/1:0, since 1d02h
Se0/0/2:0, since 00:07:03

T1 0/0/0 is up. Total Data (last 24 hours) 0 Line Code Violations, 0 Path Code Violations, 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

T1 0/0/1 is up. Total Data (last 24 hours) 0 Line Code Violations, 11 Path Code Violations, 0 Slip Secs, 1 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, 3 Errored Secs, 2 Bursty Err Secs, 1 Severely Err Secs, 0 Unavail Secs

T1 0/0/2 is up. Total Data (last 24 hours) 7058 Line Code Violations, 41 Path Code Violations, 0 Slip Secs, 21 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins, 7 Errored Secs, 3 Bursty Err Secs, 3 Severely Err Secs, 26 Unavail Secs

T1 0/0/3 is administratively down.

------- PING Stats for google ------

Type escape sequence to abort. Sending 10, 1500-byte ICMP Echos to 8.8.8.8, timeout is 2 seconds: Packet has data pattern 0xFFFF .......... Success rate is 0 percent (0/10)

The metro script has a very similar script output but with interface errors instead of circuit errors

About

troubleshooting scripts for cisco devices connected to a t1 or metro WAN

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published