Blk.vhost blk #317

Peter--wang · 2016-09-02T09:35:37Z

No description provided.

vhost-blk is an in-kernel virito-blk device accelerator. Due to lack of proper in-kernel AIO interface, this version converts guest's I/O request to bio and use submit_bio() to submit I/O directly. So this version any supports raw block device as guest's disk image, e.g. /dev/sda, /dev/ram0. We can add file based image support to vhost-blk once we have in-kernel AIO interface. There are some work in progress for in-kernel AIO interface from Dave Kleikamp and Zach Brown: http://marc.info/?l=linux-fsdevel&m=133312234313122 Performance evaluation: ----------------------------- LKVM: Fio with libaio ioengine on 1 Fusion IO device IOPS(k) Before After Improvement seq-read 107 121 +13.0% seq-write 130 179 +37.6% rnd-read 102 122 +19.6% rnd-write 125 159 +27.0% QEMU: Fio with libaio ioengine on 1 Fusion IO device IOPS(k) Before After Improvement seq-read 76 123 +61.8% seq-write 139 173 +24.4% rnd-read 73 120 +64.3% rnd-write 75 156 +108.0% QEMU: Fio with libaio ioengine on 1 Ramdisk device IOPS(k) Before After Improvement seq-read 138 437 +216% seq-write 191 436 +128% rnd-read 137 426 +210% rnd-write 140 415 +196% QEMU: Fio with libaio ioengine on 8 Ramdisk device 50% read + 50% write IOPS(k) Before After Improvement randrw 64/64 189/189 +195%/+195% Userspace bits: ----------------------------- 1) LKVM The latest vhost-blk userspace bits for kvm tool can be found here: git:/asias/linux-kvm.git blk.vhost-blk 2) QEMU The latest vhost-blk userspace prototype for QEMU can be found here: git:/asias/qemu.git blk.vhost-blk You can also found this patch on: git:/asias/linux.igt blk.vhost-blk Changes in v7: - Fix flush complete - Add EVENTFD as dependency - Drop EXPERIMENTAL - Fix arg and argp - Rename vhost_blk_req_umap -> vhost_blk_req_unmap - Use put_page instead of page_cache_release - Release pages when less pages are pinned than wanted - Fix for commit 935cdee 'vhost: avoid backend flush on vring ops' Changes in v6: - Use inline req_page_list to reduce kmalloc - Switch to single thread model, thanks mst! - Wait until requests fired before vhost_blk_flush to be finished Changes in v5: - Do not assume the buffer layout - Fix wakeup race - Rename vhost_blk_req_umap -> vhost_blk_req_unmap - Use put_page instead of page_cache_release - Release pages when less pages are pinned than wanted Changes in v4: - Mark req->status as userspace pointer - Use __copy_to_user() instead of copy_to_user() in vhost_blk_set_status() - Add if (need_resched()) schedule() in blk thread - Kill vhost_blk_stop_vq() and move it into vhost_blk_stop() - Use vq_err() instead of pr_warn() - Fail un Unsupported request - Add flush in vhost_blk_set_features() Changes in v3: - Sending REQ_FLUSH bio instead of vfs_fsync, thanks Christoph! - Check file passed by user is a raw block device file Acked-by: David S. Miller <[email protected]> Signed-off-by: Asias He <[email protected]>

When guest kernel doing buffered write, the bio pages could be bigger than BIO_MAX_PAGES, in that case, the bio_alloc will failed, and guest will hang on waiting for bio complete which will never happen. This patch split the bio pages when it's bigger than BIO_MAX_PAGES. Signed-off-by: Ni Xun <[email protected]>

lkl: enable HIGH_RES_TIMERS (hrtimer) for the arch

WARNING: line over 80 characters torvalds#97: FILE: arch/powerpc/include/asm/smp.h:59: +extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); WARNING: line over 80 characters torvalds#119: FILE: arch/powerpc/kernel/exceptions-64s.S:1276: +#if defined(CONFIG_HARDLOCKUP_DETECTOR) && defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) ERROR: do not initialise statics to 0 torvalds#317: FILE: arch/powerpc/kernel/watchdog.c:62: +static unsigned long __wd_smp_lock = 0; WARNING: memory barrier without comment torvalds#554: FILE: arch/powerpc/kernel/watchdog.c:299: + smp_wmb(); WARNING: Prefer pr_warn(... to pr_warning(... torvalds#617: FILE: arch/powerpc/kernel/watchdog.c:362: + pr_warning("Watchdog could not be initialized"); total: 1 errors, 4 warnings, 543 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-64s-implement-arch-specific-hardlockup-watchdog.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Nicholas Piggin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

WARNING: line over 80 characters linux-sunxi#97: FILE: arch/powerpc/include/asm/smp.h:59: +extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); WARNING: line over 80 characters linux-sunxi#119: FILE: arch/powerpc/kernel/exceptions-64s.S:1276: +#if defined(CONFIG_HARDLOCKUP_DETECTOR) && defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) ERROR: do not initialise statics to 0 torvalds#317: FILE: arch/powerpc/kernel/watchdog.c:62: +static unsigned long __wd_smp_lock = 0; WARNING: memory barrier without comment torvalds#554: FILE: arch/powerpc/kernel/watchdog.c:299: + smp_wmb(); WARNING: Prefer pr_warn(... to pr_warning(... torvalds#617: FILE: arch/powerpc/kernel/watchdog.c:362: + pr_warning("Watchdog could not be initialized"); total: 1 errors, 4 warnings, 543 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-64s-implement-arch-specific-hardlockup-watchdog.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Nicholas Piggin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

WARNING: line over 80 characters torvalds#97: FILE: arch/powerpc/include/asm/smp.h:59: +extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); WARNING: line over 80 characters torvalds#119: FILE: arch/powerpc/kernel/exceptions-64s.S:1276: +#if defined(CONFIG_HARDLOCKUP_DETECTOR) && defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) ERROR: do not initialise statics to 0 torvalds#317: FILE: arch/powerpc/kernel/watchdog.c:62: +static unsigned long __wd_smp_lock = 0; WARNING: memory barrier without comment torvalds#554: FILE: arch/powerpc/kernel/watchdog.c:299: + smp_wmb(); WARNING: Prefer pr_warn(... to pr_warning(... torvalds#617: FILE: arch/powerpc/kernel/watchdog.c:362: + pr_warning("Watchdog could not be initialized"); total: 1 errors, 4 warnings, 543 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-64s-implement-arch-specific-hardlockup-watchdog.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Nicholas Piggin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

…ntel-audio Merge/backport/v4.19 intel audio

The commit 19b07cb ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines") introduced a new check in order to enumerate some slave devices on Dell machines. Though, it brings a regression on machines where DMI vendor is not set. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 8 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc4-next-20190613+ torvalds#317 RIP: 0010:strcmp+0xc/0x20 To fix this crash, check if vendor field is present before accessing to it. Fixes: 19b07cb ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines") Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Pali Rohár <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>

It is easier than I though to trigger a kernel bug by removing memory that was never onlined. With CONFIG_DEBUG_VM the memmap is initialized with garbage, resulting in the detection of a broken zone when removing memory. Without CONFIG_DEBUG_VM it is less likely - but we could still have garbage in the memmap. :/# [ 23.912993] BUG: unable to handle page fault for address: 000000000000353d [ 23.914219] #PF: supervisor write access in kernel mode [ 23.915199] #PF: error_code(0x0002) - not-present page [ 23.916160] PGD 0 P4D 0 [ 23.916627] Oops: 0002 [#1] SMP PTI [ 23.917256] CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 [ 23.918900] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 [ 23.921194] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 23.922249] RIP: 0010:clear_zone_contiguous+0x5/0x10 [ 23.923173] Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 [ 23.926876] RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 [ 23.927928] RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 [ 23.929458] RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 [ 23.930899] RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 [ 23.932362] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 [ 23.933603] R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 [ 23.934913] FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 [ 23.936294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.937481] CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 [ 23.938687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.939889] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.941168] Call Trace: [ 23.941580] __remove_pages+0x4b/0x640 [ 23.942303] ? mark_held_locks+0x49/0x70 [ 23.943149] arch_remove_memory+0x63/0x8d [ 23.943921] try_remove_memory+0xdb/0x130 [ 23.944766] ? walk_memory_blocks+0x7f/0x9e [ 23.945616] __remove_memory+0xa/0x11 [ 23.946274] acpi_memory_device_remove+0x70/0x100 [ 23.947308] acpi_bus_trim+0x55/0x90 [ 23.947914] acpi_device_hotplug+0x227/0x3a0 [ 23.948714] acpi_hotplug_work_fn+0x1a/0x30 [ 23.949433] process_one_work+0x221/0x550 [ 23.950190] worker_thread+0x50/0x3b0 [ 23.950993] kthread+0x105/0x140 [ 23.951644] ? process_one_work+0x550/0x550 [ 23.952508] ? kthread_park+0x80/0x80 [ 23.953367] ret_from_fork+0x3a/0x50 [ 23.954025] Modules linked in: [ 23.954613] CR2: 000000000000353d [ 23.955248] ---[ end trace 93d982b1fb3e1a69 ]--- But the problem is more extreme: When removing memory we could have - Single memory blocks that fall into no zone (never onlined) - Single memory blocks that fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Right now, the zones don't get updated properly in these cases. So let's simply process all zones for now until we can properly handle this via the reverse of move_pfn_range_to_zone() (which would then be called something like remove_pfn_range_from_zone()), for example, when offlining memory or before removing ZONE_DEVICE memory. To speed things up, only mark applicable zones non-contiguous (and therefore reduce the zones to recompute) and skip non-intersecting zones when trying to resize. shrink_zone_span() and shrink_pgdat_span() seem to be able to cope just fine with pfn ranges they don't actually contain (but still intersect with). Don't check for zone_intersects() when triggering set_zone_contiguous() - we might have resized the zone and the check might no longer hold. For now, we have to try to recompute any zone (which will be skipped in case the zone is already contiguous). Note1: Detecting which memory is still part of a zone is not easy before removing memory as the detection relies almost completely on pfn_valid() right now. pfn_online() cannot be used as ZONE_DEVICE memory is never online. pfn_present() cannot be used as all memory is present once it was added (but not onlined). We need to rethink/refactor this properly. Note2: We are safe to call zone_intersects() without locking (as already done by onlining code in default_zone_for_pfn()), as we are protected by the memory hotplug lock - just like zone->contiguous. Cc: Andrew Morton <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Dan Williams <[email protected]> Cc: Wei Yang <[email protected]> Signed-off-by: David Hildenbrand <[email protected]>

Remove memory from the zone when offlining and when onlining failed (we only have a single zone) in case of !ZONE_DEVICE memory. Do the same with ZONE_DEVICE memory before removing memory. Introduce remove_pfn_range_from_zone(). This fixes a whole bunch of BUGs we have in our code right now when removing memory whereby - Single memory blocks that fall into no zone (never onlined) - Single memory blocks that fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Right now, the zones don't get updated properly in these cases. And we can trigger kernel bugs when removing memory that was never onlined: :/# [ 23.912993] BUG: unable to handle page fault for address: 000000000000353d [ 23.914219] #PF: supervisor write access in kernel mode [ 23.915199] #PF: error_code(0x0002) - not-present page [ 23.916160] PGD 0 P4D 0 [ 23.916627] Oops: 0002 [#1] SMP PTI [ 23.917256] CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 [ 23.918900] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 [ 23.921194] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 23.922249] RIP: 0010:clear_zone_contiguous+0x5/0x10 [ 23.923173] Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 [ 23.926876] RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 [ 23.927928] RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 [ 23.929458] RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 [ 23.930899] RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 [ 23.932362] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 [ 23.933603] R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 [ 23.934913] FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 [ 23.936294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.937481] CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 [ 23.938687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.939889] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.941168] Call Trace: [ 23.941580] __remove_pages+0x4b/0x640 [ 23.942303] ? mark_held_locks+0x49/0x70 [ 23.943149] arch_remove_memory+0x63/0x8d [ 23.943921] try_remove_memory+0xdb/0x130 [ 23.944766] ? walk_memory_blocks+0x7f/0x9e [ 23.945616] __remove_memory+0xa/0x11 [ 23.946274] acpi_memory_device_remove+0x70/0x100 [ 23.947308] acpi_bus_trim+0x55/0x90 [ 23.947914] acpi_device_hotplug+0x227/0x3a0 [ 23.948714] acpi_hotplug_work_fn+0x1a/0x30 [ 23.949433] process_one_work+0x221/0x550 [ 23.950190] worker_thread+0x50/0x3b0 [ 23.950993] kthread+0x105/0x140 [ 23.951644] ? process_one_work+0x550/0x550 [ 23.952508] ? kthread_park+0x80/0x80 [ 23.953367] ret_from_fork+0x3a/0x50 [ 23.954025] Modules linked in: [ 23.954613] CR2: 000000000000353d [ 23.955248] ---[ end trace 93d982b1fb3e1a69 ]--- Cc: Andrew Morton <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Dan Williams <[email protected]> Cc: Wei Yang <[email protected]> Cc: Qian Cai <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: Ira Weiny <[email protected]> Signed-off-by: David Hildenbrand <[email protected]>

We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): :/# [ 23.912993] BUG: unable to handle page fault for address: 000000000000353d [ 23.914219] #PF: supervisor write access in kernel mode [ 23.915199] #PF: error_code(0x0002) - not-present page [ 23.916160] PGD 0 P4D 0 [ 23.916627] Oops: 0002 [#1] SMP PTI [ 23.917256] CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 [ 23.918900] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 [ 23.921194] Workqueue: kacpi_hotplug acpi_hotplug_work_fn [ 23.922249] RIP: 0010:clear_zone_contiguous+0x5/0x10 [ 23.923173] Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 [ 23.926876] RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 [ 23.927928] RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 [ 23.929458] RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 [ 23.930899] RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 [ 23.932362] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 [ 23.933603] R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 [ 23.934913] FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 [ 23.936294] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.937481] CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 [ 23.938687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.939889] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.941168] Call Trace: [ 23.941580] __remove_pages+0x4b/0x640 [ 23.942303] ? mark_held_locks+0x49/0x70 [ 23.943149] arch_remove_memory+0x63/0x8d [ 23.943921] try_remove_memory+0xdb/0x130 [ 23.944766] ? walk_memory_blocks+0x7f/0x9e [ 23.945616] __remove_memory+0xa/0x11 [ 23.946274] acpi_memory_device_remove+0x70/0x100 [ 23.947308] acpi_bus_trim+0x55/0x90 [ 23.947914] acpi_device_hotplug+0x227/0x3a0 [ 23.948714] acpi_hotplug_work_fn+0x1a/0x30 [ 23.949433] process_one_work+0x221/0x550 [ 23.950190] worker_thread+0x50/0x3b0 [ 23.950993] kthread+0x105/0x140 [ 23.951644] ? process_one_work+0x550/0x550 [ 23.952508] ? kthread_park+0x80/0x80 [ 23.953367] ret_from_fork+0x3a/0x50 [ 23.954025] Modules linked in: [ 23.954613] CR2: 000000000000353d [ 23.955248] ---[ end trace 93d982b1fb3e1a69 ]--- Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Tony Luck <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Cc: Andrew Morton <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Steve Capper <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Yu Zhao <[email protected]> Cc: Jun Yao <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Halil Pasic <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Dan Williams <[email protected]> Cc: Wei Yang <[email protected]> Cc: Qian Cai <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: Ira Weiny <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: d0dc12e ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: David Hildenbrand <[email protected]>

commit feee6b2 upstream. -- snip -- - Missing arm64 hot(un)plug support - Missing some vmem_altmap_offset() cleanups - Missing sub-section hotadd support - Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/[email protected] Fixes: f1dd2cd ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Dan Williams <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: <[email protected]> [5.0+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: David Hildenbrand <[email protected]>

commit feee6b2 upstream. -- snip -- - Missing arm64 hot(un)plug support - Missing some vmem_altmap_offset() cleanups - Missing sub-section hotadd support - Missing unification of mm/hmm.c and kernel/memremap.c -- snip -- We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/[email protected] Fixes: f1dd2cd ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Dan Williams <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: <[email protected]> [5.0+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: David Hildenbrand <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/1861710 commit feee6b2 upstream. We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/[email protected] Fixes: f1dd2cd ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Dan Williams <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: <[email protected]> [5.0+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Kamal Mostafa <[email protected]> Signed-off-by: Khalid Elmously <[email protected]>

We currently try to shrink a single zone when removing memory. We use the zone of the first page of the memory we are removing. If that memmap was never initialized (e.g., memory was never onlined), we will read garbage and can trigger kernel BUGs (due to a stale pointer): BUG: unable to handle page fault for address: 000000000000353d #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ torvalds#317 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4 Workqueue: kacpi_hotplug acpi_hotplug_work_fn RIP: 0010:clear_zone_contiguous+0x5/0x10 Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840 RSP: 0018:ffffad2400043c98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000 RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40 RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000 R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680 FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __remove_pages+0x4b/0x640 arch_remove_memory+0x63/0x8d try_remove_memory+0xdb/0x130 __remove_memory+0xa/0x11 acpi_memory_device_remove+0x70/0x100 acpi_bus_trim+0x55/0x90 acpi_device_hotplug+0x227/0x3a0 acpi_hotplug_work_fn+0x1a/0x30 process_one_work+0x221/0x550 worker_thread+0x50/0x3b0 kthread+0x105/0x140 ret_from_fork+0x3a/0x50 Modules linked in: CR2: 000000000000353d Instead, shrink the zones when offlining memory or when onlining failed. Introduce and use remove_pfn_range_from_zone(() for that. We now properly shrink the zones, even if we have DIMMs whereby - Some memory blocks fall into no zone (never onlined) - Some memory blocks fall into multiple zones (offlined+re-onlined) - Multiple memory blocks that fall into different zones Drop the zone parameter (with a potential dubious value) from __remove_pages() and __remove_section(). Link: http://lkml.kernel.org/r/[email protected] Fixes: f1dd2cd ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e] Signed-off-by: David Hildenbrand <[email protected]> Reviewed-by: Oscar Salvador <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: "Aneesh Kumar K.V" <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Dan Williams <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: <[email protected]> [5.0+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]> (cherry picked from commit feee6b2)

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#12: FILE: ./hal/HalBtc8723b1Ant.c:12: +static struct COEX_DM_8723B_1ANT * pCoexDm = &GLCoexDm8723b1Ant; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#14: FILE: ./hal/HalBtc8723b1Ant.c:14: +static struct COEX_STA_8723B_1ANT * pCoexSta = &GLCoexSta8723b1Ant; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#154: FILE: ./hal/HalBtc8723b1Ant.c:154: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u32 disRateMask ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#169: FILE: ./hal/HalBtc8723b1Ant.c:169: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#207: FILE: ./hal/HalBtc8723b1Ant.c:207: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#234: FILE: ./hal/HalBtc8723b1Ant.c:234: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#260: FILE: ./hal/HalBtc8723b1Ant.c:260: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#288: FILE: ./hal/HalBtc8723b1Ant.c:288: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#317: FILE: ./hal/HalBtc8723b1Ant.c:317: +static void halbtc8723b1ant_QueryBtInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#334: FILE: ./hal/HalBtc8723b1Ant.c:334: +static void halbtc8723b1ant_MonitorBtCtr(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#395: FILE: ./hal/HalBtc8723b1Ant.c:395: +static void halbtc8723b1ant_MonitorWiFiCtr(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#481: FILE: ./hal/HalBtc8723b1Ant.c:481: +static bool halbtc8723b1ant_IsWifiStatusChanged(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#516: FILE: ./hal/HalBtc8723b1Ant.c:516: +static void halbtc8723b1ant_UpdateBtLinkInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#518: FILE: ./hal/HalBtc8723b1Ant.c:518: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#580: FILE: ./hal/HalBtc8723b1Ant.c:580: +static u8 halbtc8723b1ant_ActionAlgorithm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#582: FILE: ./hal/HalBtc8723b1Ant.c:582: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#808: FILE: ./hal/HalBtc8723b1Ant.c:808: + struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRa ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#836: FILE: ./hal/HalBtc8723b1Ant.c:836: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bLowPenaltyRa ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#853: FILE: ./hal/HalBtc8723b1Ant.c:853: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#890: FILE: ./hal/HalBtc8723b1Ant.c:890: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#933: FILE: ./hal/HalBtc8723b1Ant.c:933: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #991: FILE: ./hal/HalBtc8723b1Ant.c:991: + struct BTC_COEXIST * pBtCoexist, bool bEnable ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1012: FILE: ./hal/HalBtc8723b1Ant.c:1012: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bEnable ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1046: FILE: ./hal/HalBtc8723b1Ant.c:1046: + struct BTC_COEXIST * pBtCoexist, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1057: FILE: ./hal/HalBtc8723b1Ant.c:1057: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1108: FILE: ./hal/HalBtc8723b1Ant.c:1108: + struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRA ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1121: FILE: ./hal/HalBtc8723b1Ant.c:1121: + struct BTC_COEXIST * pBtCoexist, u8 antPosType, bool bInitHwCfg, bool bWifiOff ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1124: FILE: ./hal/HalBtc8723b1Ant.c:1124: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1310: FILE: ./hal/HalBtc8723b1Ant.c:1310: + struct BTC_COEXIST * pBtCoexist, u8 byte1, u8 byte2, u8 byte3, u8 byte4, u8 byte5 ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1364: FILE: ./hal/HalBtc8723b1Ant.c:1364: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bTurnOn, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1367: FILE: ./hal/HalBtc8723b1Ant.c:1367: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1664: FILE: ./hal/HalBtc8723b1Ant.c:1664: +static bool halbtc8723b1ant_IsCommonAction(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1755: FILE: ./hal/HalBtc8723b1Ant.c:1755: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1944: FILE: ./hal/HalBtc8723b1Ant.c:1944: + struct BTC_COEXIST * pBtCoexist, bool bNewPsState ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1966: FILE: ./hal/HalBtc8723b1Ant.c:1966: + struct BTC_COEXIST * pBtCoexist, u8 psType, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2014: FILE: ./hal/HalBtc8723b1Ant.c:2014: +static void halbtc8723b1ant_ActionWifiMultiPort(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2022: FILE: ./hal/HalBtc8723b1Ant.c:2022: +static void halbtc8723b1ant_ActionHs(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2028: FILE: ./hal/HalBtc8723b1Ant.c:2028: +static void halbtc8723b1ant_ActionBtInquiry(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2030: FILE: ./hal/HalBtc8723b1Ant.c:2030: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2070: FILE: ./hal/HalBtc8723b1Ant.c:2070: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2073: FILE: ./hal/HalBtc8723b1Ant.c:2073: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2090: FILE: ./hal/HalBtc8723b1Ant.c:2090: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2095: FILE: ./hal/HalBtc8723b1Ant.c:2095: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2144: FILE: ./hal/HalBtc8723b1Ant.c:2144: +static void halbtc8723b1ant_ActionWifiNotConnected(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2155: FILE: ./hal/HalBtc8723b1Ant.c:2155: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2158: FILE: ./hal/HalBtc8723b1Ant.c:2158: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2189: FILE: ./hal/HalBtc8723b1Ant.c:2189: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2192: FILE: ./hal/HalBtc8723b1Ant.c:2192: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2213: FILE: ./hal/HalBtc8723b1Ant.c:2213: +static void halbtc8723b1ant_ActionWifiConnectedScan(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2215: FILE: ./hal/HalBtc8723b1Ant.c:2215: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2246: FILE: ./hal/HalBtc8723b1Ant.c:2246: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2249: FILE: ./hal/HalBtc8723b1Ant.c:2249: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2270: FILE: ./hal/HalBtc8723b1Ant.c:2270: +static void halbtc8723b1ant_ActionWifiConnected(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2390: FILE: ./hal/HalBtc8723b1Ant.c:2390: +static void halbtc8723b1ant_RunSwCoexistMechanism(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2449: FILE: ./hal/HalBtc8723b1Ant.c:2449: +static void halbtc8723b1ant_RunCoexistMechanism(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2451: FILE: ./hal/HalBtc8723b1Ant.c:2451: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2582: FILE: ./hal/HalBtc8723b1Ant.c:2582: +static void halbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2596: FILE: ./hal/HalBtc8723b1Ant.c:2596: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2651: FILE: ./hal/HalBtc8723b1Ant.c:2651: +void EXhalbtc8723b1ant_PowerOnSetting(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2653: FILE: ./hal/HalBtc8723b1Ant.c:2653: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2703: FILE: ./hal/HalBtc8723b1Ant.c:2703: +void EXhalbtc8723b1ant_InitHwConfig(struct BTC_COEXIST * pBtCoexist, bool bWifiOnly) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2708: FILE: ./hal/HalBtc8723b1Ant.c:2708: +void EXhalbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2723: FILE: ./hal/HalBtc8723b1Ant.c:2723: +void EXhalbtc8723b1ant_DisplayCoexInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2725: FILE: ./hal/HalBtc8723b1Ant.c:2725: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2726: FILE: ./hal/HalBtc8723b1Ant.c:2726: + struct BTC_STACK_INFO * pStackInfo = &pBtCoexist->stackInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2727: FILE: ./hal/HalBtc8723b1Ant.c:2727: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3186: FILE: ./hal/HalBtc8723b1Ant.c:3186: +void EXhalbtc8723b1ant_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3212: FILE: ./hal/HalBtc8723b1Ant.c:3212: +void EXhalbtc8723b1ant_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3230: FILE: ./hal/HalBtc8723b1Ant.c:3230: +void EXhalbtc8723b1ant_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3320: FILE: ./hal/HalBtc8723b1Ant.c:3320: +void EXhalbtc8723b1ant_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3377: FILE: ./hal/HalBtc8723b1Ant.c:3377: +void EXhalbtc8723b1ant_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3447: FILE: ./hal/HalBtc8723b1Ant.c:3447: +void EXhalbtc8723b1ant_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3536: FILE: ./hal/HalBtc8723b1Ant.c:3536: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3701: FILE: ./hal/HalBtc8723b1Ant.c:3701: +void EXhalbtc8723b1ant_HaltNotify(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3716: FILE: ./hal/HalBtc8723b1Ant.c:3716: +void EXhalbtc8723b1ant_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3738: FILE: ./hal/HalBtc8723b1Ant.c:3738: +void EXhalbtc8723b1ant_Periodical(struct BTC_COEXIST * pBtCoexist) Signed-off-by: Marco Cesati <[email protected]>

This commit fixes the following checkpatch.pl errors: ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#12: FILE: ./hal/HalBtc8723b1Ant.c:12: +static struct COEX_DM_8723B_1ANT * pCoexDm = &GLCoexDm8723b1Ant; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#14: FILE: ./hal/HalBtc8723b1Ant.c:14: +static struct COEX_STA_8723B_1ANT * pCoexSta = &GLCoexSta8723b1Ant; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#154: FILE: ./hal/HalBtc8723b1Ant.c:154: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u32 disRateMask ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#169: FILE: ./hal/HalBtc8723b1Ant.c:169: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#207: FILE: ./hal/HalBtc8723b1Ant.c:207: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#234: FILE: ./hal/HalBtc8723b1Ant.c:234: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#260: FILE: ./hal/HalBtc8723b1Ant.c:260: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#288: FILE: ./hal/HalBtc8723b1Ant.c:288: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#317: FILE: ./hal/HalBtc8723b1Ant.c:317: +static void halbtc8723b1ant_QueryBtInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#334: FILE: ./hal/HalBtc8723b1Ant.c:334: +static void halbtc8723b1ant_MonitorBtCtr(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#395: FILE: ./hal/HalBtc8723b1Ant.c:395: +static void halbtc8723b1ant_MonitorWiFiCtr(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#481: FILE: ./hal/HalBtc8723b1Ant.c:481: +static bool halbtc8723b1ant_IsWifiStatusChanged(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#516: FILE: ./hal/HalBtc8723b1Ant.c:516: +static void halbtc8723b1ant_UpdateBtLinkInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#518: FILE: ./hal/HalBtc8723b1Ant.c:518: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#580: FILE: ./hal/HalBtc8723b1Ant.c:580: +static u8 halbtc8723b1ant_ActionAlgorithm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#582: FILE: ./hal/HalBtc8723b1Ant.c:582: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#808: FILE: ./hal/HalBtc8723b1Ant.c:808: + struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRa ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#836: FILE: ./hal/HalBtc8723b1Ant.c:836: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bLowPenaltyRa ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#853: FILE: ./hal/HalBtc8723b1Ant.c:853: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#890: FILE: ./hal/HalBtc8723b1Ant.c:890: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" torvalds#933: FILE: ./hal/HalBtc8723b1Ant.c:933: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #991: FILE: ./hal/HalBtc8723b1Ant.c:991: + struct BTC_COEXIST * pBtCoexist, bool bEnable ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1012: FILE: ./hal/HalBtc8723b1Ant.c:1012: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bEnable ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1046: FILE: ./hal/HalBtc8723b1Ant.c:1046: + struct BTC_COEXIST * pBtCoexist, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1057: FILE: ./hal/HalBtc8723b1Ant.c:1057: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1108: FILE: ./hal/HalBtc8723b1Ant.c:1108: + struct BTC_COEXIST * pBtCoexist, bool bLowPenaltyRA ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1121: FILE: ./hal/HalBtc8723b1Ant.c:1121: + struct BTC_COEXIST * pBtCoexist, u8 antPosType, bool bInitHwCfg, bool bWifiOff ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1124: FILE: ./hal/HalBtc8723b1Ant.c:1124: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1310: FILE: ./hal/HalBtc8723b1Ant.c:1310: + struct BTC_COEXIST * pBtCoexist, u8 byte1, u8 byte2, u8 byte3, u8 byte4, u8 byte5 ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1364: FILE: ./hal/HalBtc8723b1Ant.c:1364: + struct BTC_COEXIST * pBtCoexist, bool bForceExec, bool bTurnOn, u8 type ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1367: FILE: ./hal/HalBtc8723b1Ant.c:1367: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1664: FILE: ./hal/HalBtc8723b1Ant.c:1664: +static bool halbtc8723b1ant_IsCommonAction(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1755: FILE: ./hal/HalBtc8723b1Ant.c:1755: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1944: FILE: ./hal/HalBtc8723b1Ant.c:1944: + struct BTC_COEXIST * pBtCoexist, bool bNewPsState ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #1966: FILE: ./hal/HalBtc8723b1Ant.c:1966: + struct BTC_COEXIST * pBtCoexist, u8 psType, u8 lpsVal, u8 rpwmVal ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2014: FILE: ./hal/HalBtc8723b1Ant.c:2014: +static void halbtc8723b1ant_ActionWifiMultiPort(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2022: FILE: ./hal/HalBtc8723b1Ant.c:2022: +static void halbtc8723b1ant_ActionHs(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2028: FILE: ./hal/HalBtc8723b1Ant.c:2028: +static void halbtc8723b1ant_ActionBtInquiry(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2030: FILE: ./hal/HalBtc8723b1Ant.c:2030: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2070: FILE: ./hal/HalBtc8723b1Ant.c:2070: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2073: FILE: ./hal/HalBtc8723b1Ant.c:2073: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2090: FILE: ./hal/HalBtc8723b1Ant.c:2090: + struct BTC_COEXIST * pBtCoexist, u8 wifiStatus ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2095: FILE: ./hal/HalBtc8723b1Ant.c:2095: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2144: FILE: ./hal/HalBtc8723b1Ant.c:2144: +static void halbtc8723b1ant_ActionWifiNotConnected(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2155: FILE: ./hal/HalBtc8723b1Ant.c:2155: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2158: FILE: ./hal/HalBtc8723b1Ant.c:2158: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2189: FILE: ./hal/HalBtc8723b1Ant.c:2189: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2192: FILE: ./hal/HalBtc8723b1Ant.c:2192: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2213: FILE: ./hal/HalBtc8723b1Ant.c:2213: +static void halbtc8723b1ant_ActionWifiConnectedScan(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2215: FILE: ./hal/HalBtc8723b1Ant.c:2215: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2246: FILE: ./hal/HalBtc8723b1Ant.c:2246: + struct BTC_COEXIST * pBtCoexist ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2249: FILE: ./hal/HalBtc8723b1Ant.c:2249: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2270: FILE: ./hal/HalBtc8723b1Ant.c:2270: +static void halbtc8723b1ant_ActionWifiConnected(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2390: FILE: ./hal/HalBtc8723b1Ant.c:2390: +static void halbtc8723b1ant_RunSwCoexistMechanism(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2449: FILE: ./hal/HalBtc8723b1Ant.c:2449: +static void halbtc8723b1ant_RunCoexistMechanism(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2451: FILE: ./hal/HalBtc8723b1Ant.c:2451: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2582: FILE: ./hal/HalBtc8723b1Ant.c:2582: +static void halbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2596: FILE: ./hal/HalBtc8723b1Ant.c:2596: + struct BTC_COEXIST * pBtCoexist, ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2651: FILE: ./hal/HalBtc8723b1Ant.c:2651: +void EXhalbtc8723b1ant_PowerOnSetting(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2653: FILE: ./hal/HalBtc8723b1Ant.c:2653: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2703: FILE: ./hal/HalBtc8723b1Ant.c:2703: +void EXhalbtc8723b1ant_InitHwConfig(struct BTC_COEXIST * pBtCoexist, bool bWifiOnly) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2708: FILE: ./hal/HalBtc8723b1Ant.c:2708: +void EXhalbtc8723b1ant_InitCoexDm(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2723: FILE: ./hal/HalBtc8723b1Ant.c:2723: +void EXhalbtc8723b1ant_DisplayCoexInfo(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2725: FILE: ./hal/HalBtc8723b1Ant.c:2725: + struct BTC_BOARD_INFO * pBoardInfo = &pBtCoexist->boardInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2726: FILE: ./hal/HalBtc8723b1Ant.c:2726: + struct BTC_STACK_INFO * pStackInfo = &pBtCoexist->stackInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #2727: FILE: ./hal/HalBtc8723b1Ant.c:2727: + struct BTC_BT_LINK_INFO * pBtLinkInfo = &pBtCoexist->btLinkInfo; ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3186: FILE: ./hal/HalBtc8723b1Ant.c:3186: +void EXhalbtc8723b1ant_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3212: FILE: ./hal/HalBtc8723b1Ant.c:3212: +void EXhalbtc8723b1ant_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3230: FILE: ./hal/HalBtc8723b1Ant.c:3230: +void EXhalbtc8723b1ant_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3320: FILE: ./hal/HalBtc8723b1Ant.c:3320: +void EXhalbtc8723b1ant_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3377: FILE: ./hal/HalBtc8723b1Ant.c:3377: +void EXhalbtc8723b1ant_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3447: FILE: ./hal/HalBtc8723b1Ant.c:3447: +void EXhalbtc8723b1ant_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 type) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3536: FILE: ./hal/HalBtc8723b1Ant.c:3536: + struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3701: FILE: ./hal/HalBtc8723b1Ant.c:3701: +void EXhalbtc8723b1ant_HaltNotify(struct BTC_COEXIST * pBtCoexist) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3716: FILE: ./hal/HalBtc8723b1Ant.c:3716: +void EXhalbtc8723b1ant_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState) ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar" #3738: FILE: ./hal/HalBtc8723b1Ant.c:3738: +void EXhalbtc8723b1ant_Periodical(struct BTC_COEXIST * pBtCoexist) Reviewed-by: Dan Carpenter <[email protected]> Signed-off-by: Marco Cesati <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>

…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]>

…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>

Add `ScopeGuard` and use it in Binder.

…format For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…format [ Upstream commit 06d213d ] For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 torvalds#309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 torvalds#310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 torvalds#311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 torvalds#314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 torvalds#323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 torvalds#325 [hci0] 49.500311 Signed-off-by: Kiran K <[email protected]> Signed-off-by: Lokendra Singh <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf921 ("LoongArch: BPF: Support unconditional bswap instructions") Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>

We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf921 ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen <[email protected]> Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>

In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>

[ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

@2

Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

@2

[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: torvalds#82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: torvalds#165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: torvalds#169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: torvalds#313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: torvalds#314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: torvalds#316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: torvalds#317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: torvalds#318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: torvalds#320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <[email protected]>

BugLink: https://bugs.launchpad.net/bugs/2065400 [ Upstream commit a51cd6b ] In case when is64 == 1 in emit(A64_REV32(is64, dst, dst), ctx) the generated insn reverses byte order for both high and low 32-bit words, resuling in an incorrect swap as indicated by the jit test: [ 9757.262607] test_bpf: torvalds#312 BSWAP 16: 0x0123456789abcdef -> 0xefcd jited:1 8 PASS [ 9757.264435] test_bpf: torvalds#313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) [ 9757.266260] test_bpf: torvalds#314 BSWAP 64: 0x0123456789abcdef -> 0x67452301 jited:1 8 PASS [ 9757.268000] test_bpf: torvalds#315 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 jited:1 8 PASS [ 9757.269686] test_bpf: torvalds#316 BSWAP 16: 0xfedcba9876543210 -> 0x1032 jited:1 8 PASS [ 9757.271380] test_bpf: torvalds#317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) [ 9757.273022] test_bpf: torvalds#318 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe jited:1 7 PASS [ 9757.274721] test_bpf: torvalds#319 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 jited:1 9 PASS Fix this by forcing 32bit variant of rev32. Fixes: 1104247 ("bpf, arm64: Support unconditional bswap") Signed-off-by: Artem Savkov <[email protected]> Tested-by: Puranjay Mohan <[email protected]> Acked-by: Puranjay Mohan <[email protected]> Acked-by: Xu Kuohai <[email protected]> Message-ID: <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Manuel Diewald <[email protected]> Signed-off-by: Roxana Nicolescu <[email protected]>

Asias He and others added 3 commits May 22, 2013 14:25

virito-blk scan

ede050a

Peter--wang closed this Sep 2, 2016

laijs pushed a commit to laijs/linux that referenced this pull request Feb 14, 2017

Merge pull request torvalds#317 from libos-nuse/feature-hrtimer

615a744

lkl: enable HIGH_RES_TIMERS (hrtimer) for the arch

plbossart added a commit to plbossart/sound that referenced this pull request Nov 27, 2018

Merge pull request torvalds#317 from plbossart/merge/backport/v4.19-i…

0f80099

…ntel-audio Merge/backport/v4.19 intel audio

TheSven73 pushed a commit to TheSven73/linux that referenced this pull request Jun 2, 2021

Merge pull request torvalds#317 from wedsonaf/cleanup

ac536cc

Add `ScopeGuard` and use it in Binder.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Blk.vhost blk #317

Blk.vhost blk #317

Peter--wang commented Sep 2, 2016

Blk.vhost blk #317

Blk.vhost blk #317

Conversation

Peter--wang commented Sep 2, 2016