Skip to content

vrv/linux-microsecondrto

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

4 Commits
 
 
 
 
 
 

Repository files navigation

Linux TCP microsecond timers patch
Author: Vijay Vasudevan <[email protected]>

This patch adds support for microsecond-granularity TCP
retransmissions.  It replaces the existing coarse-grained timers
using the jiffy timer with microsecond-graunlarity timers using the
high-resolution timer (hrtimer) infrastructure.

Warning: This patch can cause the system to hang during heavy network
activity for versions after 2.6.28.  I have not root caused the reason,
so proceed with caution.  If you identify the problem, please let me know
or submit a pull request to this patch.

Background: This patch was developed to help mitigate the "incast"
problem for wide-fan-in, synchronized communication in datacenters.
See http://www.pdl.cmu.edu/Incast/ for details.  Our solution required
retransmissions to fire on the timescale of latencies in a datacenter
(i.e., microseconds).  This patch enables machines with
high-resolution timer capabilities to retransmit quickly on packet
loss.  Keep in mind that the retransmission timeout is always
calculated using the flow latency, so wide-area communication should
still have timeouts in the tens to hundreds of milliseconds using this
patch.

This patch has only been tested in local clusters and on a few
externally facing machines, but needs much larger-scale testing before
further adoption.  This repository contains two versions of the patch,
one for Linux 2.6.28.10 and one for 2.6.39 (cloned just hours before
3.0-rc1 was released, so it should work on 3.0-rc1 too). The 2.6.28.10
patch has been tested in real-world clusters, whereas the 2.6.39
patch compiles but has not been tested and may contain bugs
(maintaining a separate patch across 2 years of independent kernel
development is tough!).

This patch requires that the kernel config options HIGH_RES_TIMERS and
TCP_HIGH_RES_TIMERS are enabled.

The TCP timeout defaults are unchanged on boot (e.g., 200ms minimum
TCP RTO), so you will have to execute the following sysctl commands to
change them.

sysctl -w net.ipv4.tcp_rto_min=X
  sets the minimum retransmission timeout to X microseconds. (Default 200000)

sysctl -w net.ipv4.tcp_delack_min=X
  sets the minimum delayed ACK timeout to X microseconds. (Default 40000)

sysctl -w net.ipv4.tcp_delayed_ack=0
  "disables" the delayed ACK mechanism. (=1 enables). (Default 1)

Notes:

1) These patches have not been tested, nor do they compile, with TCP
   congestion control options such as cubic, bicubic, lp, etc.
   Modifying these congestion control implementations should be
   somewhat straightforward if based off the changes from the default
   implementation.  Volunteers to implement/test are encouraged.

2) An alternative to these patches is to simply reduce TCP_RTO_MIN in
   tcp.h to 1.  However, this provides no less than 5ms
   retransmissions because the existing timer infrastructure is tied
   to HZ, which does not increase above 1000 in most configurations.
   However, this is a simple one-line change.  Note that this may have
   strange interactions with delayed ACK unless you use a patch
   above to disable delayed ACK.  See
   http://www.pdl.cmu.edu/PDL-FTP/Storage/sigcomm147-vasudevan.pdf for
   details.

3) Please read up on the incast problem using the links above to
   understand when this patch is applicable.

Please email me if you have trouble and let me know what kernel
version and the errors you are receiving.  Pull requests to fix bugs
or add functionality are greatly appreciated!

About

Linux patches to support microsecond granularity RTOs in datacenters.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published