notes_on_pwnagotchi_on_other_pis_and_raspbian.txt

Physical Setup:
  My current development setup is a Raspberry Pi 4 running a standard Raspbian installation with two USB devices: 
  an Alfa AWUS036NHA B/G/N wireless adapter and a GlobalSat BU-353-S4 GPS receiver. An optional GSM Pi HAT occasionally 
  makes an appearance. The Pi is attached to a RAVPower 26,800mAh portable charger (battery pack), which is attached to a
  NorthPada 5v 3A micro-USB power supply charger. The power supply charger stays plugged into the input of the battery pack, 
  so I can quickly and descretly pull out the wall-wart and charge, without disrupting the operating state of the Pi. My 
  active Pi switches between existing in the nude and sitting in a SmartPi Touch case, with a 7" touchscreen display, so I 
  can interact with it on the go. Keyboard and mouse also included. All of this garbage sits inside of a OGIO backpack, with
  the stupid-long 14.75" 9dBi Alfa antenna sticking out one of the deeper pockets. The GPS dongle is usually in one of the 
  higher pockets or occasionally wired through one of the headphone-jack/accessibility-port holes, to minimize any 
  interference. The Pi chills in a completely separate, insulated pocket, with absolutely no ventilation, and I'm surprised 
  my goodest boy hasn't desoldered itself yet. Doesn't matter - captured handshakes. Everything in all of the pockets is wired 
  together by cables that pass on the outside of the bag, through accessibility ports and zipper holes. I'm real tempted to 
  poke holes on the inside of the bag, and route everything on the inside, BUT THESE BAGS ARE TOO DAMN NICE TO RUIN!

Software Setup:
  Installed Raspbian lite, then manually installed the desktop environment so I could switch between the two, depending on what 
  I was doing that day. Installed a bunch of tools, configured the environment the way I like, etc.
  
  Let's talk about the Pwnagotchi installation/config instructions: https://pwnagotchi.ai/installation/
First things first:
  "apt-get install golang git build-essential libpcap-dev libusb-1.0-0-dev libnetfilter-queue-dev gpsd gpsd-clients libatlas-base-dev libhdf5-dev libjasper-dev libqtgui4 libqt4-test python3-mpi4py python3-numpy tcpdump"
    
### Next, install bettercap using the programming language no one asked for:
  go get -u github.com/bettercap/bettercap
  sudo bettercap -eval "caplets.update; ui.update; quit"

### Edit /usr/local/share/bettercap/caplets/pwnagotchi-auto.cap : 

"""
set wifi.interface wlan1mon

# api listening on http://127.0.0.1:8081/ and ui to http://127.0.0.1
set api.rest.address 127.0.0.1
set api.rest.port 8081
set http.server.address 127.0.0.1
set http.server.port 80
set http.server.path /usr/local/share/bettercap/ui
set api.rest.username PwnagotchiUsername
set api.rest.password PwnagotchiPassword

# go!
api.rest on
http.server on
"""

### Edit /usr/local/share/bettercap/caplets/pwnagotchi-manual.cap :
"""
# enable interface monitor mode and define wifi interface to be mon0
set wifi.interface wlan1mon

# api listening on http://0.0.0.0:8081/ and ui to http://0.0.0.0
set api.rest.address 0.0.0.0
set api.rest.port 8081
set http.server.address 0.0.0.0
set http.server.port 80
set http.server.path /usr/local/share/bettercap/ui
set api.rest.username PwnagotchiUsername
set api.rest.password PwnagotchiPassword

# go!
api.rest on
http.server on
"""

### The actual pwnagotchi install instructions fuck up by telling you to edit /etc/systemd/system/bettercap.service, 
### but you actually want to edit one into 'lib': /lib/systemd/system/bettercap.service
"""
[Unit]
Description=bettercap api.rest service.
Documentation=https://bettercap.org
Wants=network.target
After=pwngrid.service
RequiredBy=pwnagotchi.service

[Service]
Type=simple
PermissionsStartOnly=true
ExecStart=/usr/bin/bettercap-launcher
Restart=always
RestartSec=30

[Install]
WantedBy=multi-user.target
"""

### And let's create our bettercap launcher /usr/bin/bettercap-launcher
"""
#!/usr/bin/env bash
/usr/bin/monstart
if [[ $(ifconfig | grep usb0 | grep RUNNING) ]] || [[ $(cat /sys/class/net/eth0/carrier) ]]; then
  # if override file exists, go into auto mode
  if [ -f /root/.pwnagotchi-auto ]; then
    /usr/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan1mon
  else
    /usr/bin/bettercap -no-colors -caplet pwnagotchi-manual -iface wlan1mon
  fi
else
  /usr/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan1mon
fi
"""

### And create /usr/bin/monstart
"""
#!/bin/bash
interface=wlan1mon
echo "Bring up monitor mode interface ${interface}"
iw phy phy1 interface add ${interface} type monitor
ifconfig ${interface} up
if [ $? -eq 0 ]; then
	echo "started monitor interface on ${interface}"
fi
"""

### And create /usr/bin/monstop
"""
#!/bin/bash
interface=wlan1mon
ifconfig ${interface} down
sleep 1
iw dev ${interface} del
"""

### Do the pwngrid stuffs:
wget "https:/evilsocket/pwngrid/releases/download/v1.10.1/pwngrid_linux_amd64_v1.10.1.zip"
unzip pwngrid_linux_amd64_v1.10.1.zip
sudo mv pwngrid /usr/bin/
sudo pwngrid -generate -keys /etc/pwnagotchi

### Again, we create service stubs in lib for /lib/systemd/system/pwngrid-peer.service
"""
[Unit]
Description=pwngrid peer service.
Documentation=https://pwnagotchi.ai
Wants=network.target

[Service]
Type=simple
PermissionsStartOnly=true
ExecStart=/usr/bin/pwngrid -keys /etc/pwnagotchi -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /var/log/pwngrid-peer.log -iface wlan1mon
Restart=always
RestartSec=30

[Install]
WantedBy=multi-user.target
"""

### Do the pwnagotchi stuff:
wget "https:/evilsocket/pwnagotchi/archive/v1.0.1.zip"
unzip v1.0.1.zip
cd pwnagotchi-1.0.1

### There's a great chance that executing the pwnagotchi pip3 install will fail due to lack of memory:
sudo pip3 install .

### If it do or you don't want to wait for failure, disable the pip cache:
sudo pip3 --no-cache-dir install .

### Things like tensorflow, opencv, and keras are fairly massive. 
### This pip install may also fail if run directly as root, instead of using sudo, though I'm not sure why
### or if that was a real problem I had or if the problem is between the chair and the keyboard...

### Let's create a service stub for pwnagotchi at /lib/systemd/system/pwnagotchi.service
"""
[Unit]
Description=pwnagotchi
Documentation=https://pwnagotchi.ai
After=bettercap.service

[Service]
Type=simple
PermissionsStartOnly=true
Environment=LD_PRELOAD=/usr/lib/arm-linux-gnueabihf/libatomic.so.1.2.0
ExecStart=/usr/local/bin/pwnagotchi
Restart=always
RestartSec=30

[Install]
WantedBy=multi-user.target
"""

### For some reason, I found it necessary to add the "LD_PRELOAD=/usr/lib/arm-linux-gnueabihf/libatomic.so.1.2.0" to keep things working with pwnagotchi. Don't know, don't care; fixed.

### Permission everything as expected:
chmod 755 /usr/bin/monstart
chmod 755 /usr/bin/monstop
chmod 755 /usr/bin/bettercap-launcher
chmod 644 /lib/systemd/system/bettercap.service
chmod 644 /lib/systemd/system/pwngrid-peer.service
chmod 644 /lib/systemd/system/pwnagotchi.service

### Copy the default config as the working config:
cp /etc/pwnagotchi/default.yml /etc/pwnagotchi/config.yml

### Edit the working config as you see fit, though some values should stay in /etc/pwnagotchi/config.yml:
"""
...
# If using GPS:
      gps:
        enabled: true
        speed: 4800 
        device: /dev/ttyUSB0
...
# If using the auto-backup module, remove the scp line because what are the odds?:
        commands:
          - 'tar czf /tmp/backup.tar.gz {files}'
          - 'mv /tmp/backup.tar.gz /tmp/pwnagotchi_backup-$(date +%s).tar.gz'

# monitor interface to use is actually the interface that will become the monitor interface:
    iface: wlan1
...
# Make sure these are these:
    mon_start_cmd: /usr/bin/monstart
    mon_stop_cmd: /usr/bin/monstop
...
# Turn off the display, unless you're using one, and set the local interface to view the face over network:
ui:
    display:
        enabled: false
        video:
            enabled: true
            address: '0.0.0.0'
            port: 8080
...
# bettercap conf:
bettercap:
    # api scheme://hostname:port username and password
    scheme: http
    hostname: localhost
    port: 8081
    username: PwnagotchiUsername
    password: PwnagotchiPassword
...
"""

### Enable the service stubs we created:
systemctl enable pwngrid-peer.service
systemctl enable bettercap.service
systemctl enable pwnagotchi.service

### The order of the services starting (per how we configured them) is:
# pwngrid-peer.service
#         \/
# bettercap.service
#         \/
# pwnagotchi.service

### Now we can either start the services manually or reboot:
systemctl start pwngrid-peer.service
systemctl start bettercap.service
systemctl start pwnagotchi.service

### Stop all pwnagotchi services:
systemctl stop pwngrid-peer.service
systemctl stop bettercap.service
systemctl stop pwnagotchi.service

### Disable all pwnagotchi services from starting on reboot:
systemctl disable pwngrid-peer.service
systemctl disable bettercap.service
systemctl disable pwnagotchi.service

### Check your usual log locations and /var/log/pwnagotchi.log for issues starting.
### If you want to run them all manually, open up three root terminals and do:
# Terminal 1
monstart
/usr/bin/pwngrid -keys /etc/pwnagotchi -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /var/log/pwngrid-peer.log -iface wlan1mon

# Terminal 2
/usr/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan1mon

# Terminal 3
LD_PRELOAD=/usr/lib/arm-linux-gnueabihf/libatomic.so.1.2.0 pwnagotchi